I have been trying to clear some codes using the AE, but have been 100% unsucessful.
My procedure:
1. Connect laptop, truck, and adapter.
2. Turn ign on if not already
3. Press 'Connect to vehicle'
4. When the prompt comes up, get codes from ALL modules (yeah, I know there's only one on the OBS trucks, but I tell it ALL anyway)
5. When codes are retrieved (KAM,
CPS and overboost), I press the button to clear the codes (button on the RH side of the screen).
6. in no particular order shut off the ign, disconnect the laptop, truck, and dongle.
7. I then repeat the process, expecting the codes to be gone, but they're still there.
What am I doing wrong?