Getting ready to do mods ????

epowers777 · #1 (**permalink**) 04-20-2010, 07:10 AM

I am getting ready to pull the truck in the garage and do mods. I want to do the fuel tank mod and rebuild the fuel bowl. Then hopefully new injectors and new exhaust seals.

For the fuel mod and the rebuild fuel bowl is this a good source?
Fuel Bowl

fuel mod Also Helper Pump

Here is his site if you want to check it out:
Welcome to guzzle's Ford PSD Web Pages

Also are his prices good?

***907DAVE*** · #2 (**permalink**) 04-20-2010, 11:25 AM

Great mods!

Be sure before you start to have all the o-ring's, vibra-lok fittings, and new parts. Its is always better to have extra parts that you can keep as spare then to have to wait for them to arrive.

epowers777 · #3 (**permalink**) 04-20-2010, 05:12 PM

How about this kit? What else do I need? I was thinking of getting his whicked wheel for 100 bucks.

***907DAVE*** · #4 (**permalink**) 04-20-2010, 05:35 PM

Wow, that looks like a nice kit!

I don't think you will need anything else. The price for the WW seems high, but what you spend in just shipping cost getting it from another supplier will make up for the extra cost.

I say go for it.

epowers777 · #5 (**permalink**) 04-20-2010, 05:59 PM

Ok thats good to know. I am also going to replace the exhaust up pipe to turbo gaskets. What are they called and what price am I looking at?

And on my tranny on the driver side the electronic gaget sticking out the side is leaking. Is there a kit for the tranny too? Like o ring gasket and filter?

After I get this im going to pick your brains about injectors!! Going to take the wife on a date so I will be in tonight!

***907DAVE*** · #6 (**permalink**) 04-20-2010, 09:33 PM

Quote:

Originally Posted by epowers777

Ok thats good to know. I am also going to replace the exhaust up pipe to turbo gaskets. What are they called and what price am I looking at?
Not sure what the cost is on them as I replaced the up-pipes first change I got. I dont know what Ford's technical name is for them, but they are commonly known as up-pipe doughnuts.

And on my tranny on the driver side the electronic gaget sticking out the side is leaking. Is there a kit for the tranny too? Like o ring gasket and filter?
Yes there is a "tranny service kit" you can purchase, but really unless the pan gasket is leaking all you will need is a filter, the gasket is re-usable. Does this gadget you speak of have a single wire coming out of it? If so it is probable for an aftermarket tranny temp gauge.

After I get this im going to pick your brains about injectors!! Going to take the wife on a date so I will be in tonight!

See Blue.

hayjayhorses · #7 (**permalink**) 04-20-2010, 11:31 PM

Quote:

Originally Posted by epowers777

Ok thats good to know. I am also going to replace the exhaust up pipe to turbo gaskets. What are they called and what price am I looking at?

Turbo inlet pipes. When I did mine I wrapped them with header wrap, it cut the in cab noise and heat down.

After I get this im going to pick your brains about injectors!! Going to take the wife on a date so I will be in tonight!

I suggest single shots for better mileage.