Visit dYgYtAl Radio!
|
|
|
Visit dYgYtAl Radio! |
|
|||||||
| 6.0L PSD FICM Reprogramming Here is where you can ask questions and gather information about reprogramming the Fuel Injection Control Module for the 6.0L PSD If you have placed an order and are waiting for a remote programmer to become available, please check the FICM page on our website. A running list of customers in queue can be found on the right hand side of the page for your convenience. |
 |
|
|
LinkBack | Thread Tools | Display Modes |
02-27-2011, 10:15 AM
|
|||
|
|||
Mileage for the first 2 days after engine conversion and SCT Tunes
I've spent most of the last 2 days on the performance setting with a new 4" turbo back exhaust so you can imagine how many times the pedals been mashed.
I pulled into the gas station at a smooth 3.52 a gallon for diesel  and only put in 11 gallons! I did the math and I averaged 15.4, I realize that isn't exactly gonna win a prize for "being green" for the environment, but I can't hardly be dissappointed. This truck was getting 12-13 ish at best with the old 03 engine in it and babying it. I have a crappy strategy (VXAP2N2) and this is not terrible. I'm not sure if would do it all that much good to get a roll back done by PHP..... OR WOULD IT??? please share your stories The truck is a F350 dually with 4.10 gears.... 
Last edited by shannont80; 02-27-2011 at 10:32 AM. 
|
|
02-28-2011, 07:18 PM
|
|||
|
|||
|
.....I take that as a no
|
|
02-28-2011, 07:28 PM
|
||||
|
||||
|
I'll share as soon as I start making mods. I can tell you my '03 7.3 could get 16.5 mpg with bald tires but I can't get better than 13 with the new ones.
__________________
|
|
03-05-2011, 11:15 AM
|
|||
|
|||
|
BTW.... my conversion is an 06 engine in a 03 truck...... I noticed I didn't put any info down.
Anybody?
|
|
03-06-2011, 09:14 AM
|
|||
|
|||
|
buy a gryphon
trust me just order a new gryphon then you own it and pay bill 4 the programming it would be the quickest
an 04 original rollback ??? this will depend on your build date and the sticker number on your pcm ficm = AMZ2AL09.PHF trans = TQBD1N6.PHF <--- includes the original tow haul that came factory> pcm = VXBC1NZ.PHF <--- includes pilot injection as came with factory> all these files can be downloaded at DSFM File Download but bill has them on his server and runs your computer with remote desktop and programs the gryphon in different modes to program your trucks different modules please read Go Back Power Hungry Performance Forum > Ford Super Duty & Excursion > 2003 to 2007 6.0L Power Stroke Diesel my story and my questions (for people that need more info) i have 4 inch exhaust from turbo back and pull almost 20mpg and i have 3/73 gears
|
|
| Thread Tools | |
| Display Modes | |
|
|
|
Linear Mode
