Visit dYgYtAl Radio!
|
|
|
Visit dYgYtAl Radio! |
|
|||||||
| 6.0L PSD FICM Reprogramming Here is where you can ask questions and gather information about reprogramming the Fuel Injection Control Module for the 6.0L PSD If you have placed an order and are waiting for a remote programmer to become available, please check the FICM page on our website. A running list of customers in queue can be found on the right hand side of the page for your convenience. |
 |
|
|
LinkBack | Thread Tools | Display Modes |
06-30-2011, 07:01 PM
|
|||
|
|||
FICM reprogrammed...worse fuel economy?
I bought my 2003 F250 CCSB 4X4 last October and around December I got a ECM rollback and remote FICM reprogramming and since I've can't seem to get above 15.4 MPG. Driving the truck back from Iowa when I bought it I got close to 17 MPG and now I can't even break 15.5 MPG, even on straight highway. Anybody else have this happen?
|
|
07-01-2011, 11:51 AM
|
|||
|
|||
|
Did mine about 3 weeks ago, with no noticable change in driveability, none in milage. Hope that I did not screw up cold weather starting ability this winter.
|
|
07-02-2011, 10:35 AM
|
|||
|
|||
|
If you kept the inductive heating, you should be fine. I tried the non-inductive program one morning that was below freezing and she started but she sure wasn't happy for a couple minutes. Sat there and loped like it had a big cam, I thought it sounded cool but I'm sure the neighbors didn't at 6:00am. I put the inductive heating back on it...
|
|
07-05-2011, 10:33 AM
|
|||
|
|||
|
May have to. How is that done? Assume that I need to contact Bill and get the programer back. I do keep her plugged in at night, but she will be outside during the day here in South Dakota. Our winters only get down the the -30's or so at times
|
|
| Thread Tools | |
| Display Modes | |
|
|
|
Linear Mode
