View Full Version : new from Ohio
doubleshot
Tue, January 6th, 2009, 08:35 PM
new here from ohio. near dayton. have a 97 f350 psd mostly stock, I have installed gauges( trans. temp, boost and egt) I am interested in the 6 position phoenix, mostly want better mpg's and some power to go with it. I do pull a 10k trailer and drive it with out trailer sometimes. any comments on the phoenix good bad or other, what is the average wait for the phoenix, not in a hurry just wondering. thanks Steve
Jackpine
Tue, January 6th, 2009, 08:47 PM
I can't answer ANY of your questions, Steve, but Bill and Corey can! :thumbsup:
They won't sell you something you won't be happy about - guaranteed!
If they don't chime in here, give them a call. They're VERY easy to talk to.
Welcome aboard!
- Jack
Power Hungry
Tue, January 6th, 2009, 11:19 PM
Steve...
:welcome: Glad to have you join us! We hope you enjoy your time here. :D
To try and answer your questions, the Phoenix modules are ideally suited for your type of situation. With a click of the switch, you can change from a mildly aggressive daily driver program to a more conservative towing program that is safe for the weight you're pulling.
On top of that, we have really neat specialty programs such as High-Idle, Whisper Mode, Valet, and even can put a no-start file on one position.
There's really no negative side to going with the modules, especially since you already have a set of gauges.
If you have any other questions, give us a shout. We'd be glad to get them answered for you.
johnnyd
Wed, January 7th, 2009, 07:48 PM
Welcome dblshot :howdy:
Cajun
Wed, January 7th, 2009, 09:26 PM
Howdy! :wave:
doubleshot
Wed, January 7th, 2009, 09:37 PM
One more quick question, can you get the pcm code from the vin, sticker in the door jam or do I need to pull the pcm to get the code? thanks
Jackpine
Wed, January 7th, 2009, 09:43 PM
One more quick question, can you get the pcm code from the vin, sticker in the door jam or do I need to pull the pcm to get the code? thanks
I think you're talking about the HEX code. It's not in the VIN. You'll see it on the Gryphon's screen if you turn on the ignition and then plug the Gryphon into the OBDII port.
(200 posts)!
- Jack
doubleshot
Wed, January 7th, 2009, 09:49 PM
I was thinking about the phoenix, to order one the form ask for a pcm code?
Smoken_F150
Wed, January 7th, 2009, 11:19 PM
go diesel i love mine