programs for specific intake

[F150FX4]

Hi ya'll I'm new to this site. I am looking at getting a Gryphon but I was also looking to get the spectre CAI I was wondering if there is a custom tune for this intake cause it is 4" tubing as opposed to the others which are smaller any feed back would be awsome

[88Racing]

First off.
Welcome to the forum!
Next, my opinion on CAI's.
Save yourself some cash and do the DWV/gotts mod.
OR
Do a K+N FIPK or K+N Series 77.
One of the best user/truck/tuner friendly CAI's on the market.
OR
Stick with a CAI that's going to be 3" piping. The 3" offers the optimum flow for your TB.
The 3.5"+4" have more potential to cause drone and that noise gets annoying after awhile.
JMHO

[97Fone50]

DWV/gotts mod whats the Actual name for it so i can look it up lol i may start ordering part for my truck soon thank you

[Longshot270]

The gotts mod is only about $20 at a hardware store. It is basically a 4 or 6 inch section of a 3 inch pipe with a 3 inch flexible PVC coupling. The "gotts mod" replaces the stock snorkel in the fender well. There is a very good write up on here. This explains everything and then some...
http://forum.gopowerhungry.com/showthread.php?t=340
:thumbsup:

[Jackpine]

Just to add to this, unless you've increased the diameter of the TB, it acts as a choke point for airflow and I doubt the 4" intake can give you any benefit at all. But, since the two different sized devices were not really engineered for each other, I can see lots of potential for problems, as 88Racing said.

- Jack