Need pic of cut PCM Holder for chip install/removal..

[Robert6401]

The title pretty much says it. I know I have seen a pic of the PCM holder modded so the chip will slide in and out without having to remove the entire thing from the truck, but I can't seem to find it. Thanks for the help.

[cleatus12r]

Unfortunately, I just shipped off the remaining PCM holder that I had and I just gave my wife (ex) the camera.


It's easy though.

Just cut out the portion of the holder that covers up the J3 port. I use a cut-off wheel on a die grinder, but I've also used a soldering gun (basically as a hot knife) and one of those razor knives. I like to take off the entire inside part (closest to the pedals) to get rid of the top bolt hole.

Another thing I do is grind off the lip on the outside (toward the fender) where it goes up against the firewall so that I don't have to pry the PCM out when I remove it.

Hope this helps and sorry I don't have any pictures.

[907DAVE]

I can get you a pic, but I dont have the cord to get it off my phone. I can send it to you as a text if you like.

Sorry its the only camera I have right now.

[Power Hungry]

Cody,

Is that the (ex) wife or (ex) camera? Or both?? :doh:

[Longshot270]

I can get you a pic, but I dont have the cord to get it off my phone. I can send it to you as a text if you like.

Sorry its the only camera I have right now.

Try putting your email in place of the phone number when you send it. :thumbs up yellow:

[Robert6401]

I PM'd Dave my cell number and he texted the pics to me. Thanks for the help everyone!

[907DAVE]

Try putting your email in place of the phone number when you send it. :thumbs up yellow:

Just tried it and........It worked!

This is my first celly that I have had for about 7 years.....I hate cell phones.:censored1:

[Lococoin]

Would you mind posting the pics on here?

[907DAVE]

Here ya go....




http://i619.photobucket.com/albums/tt274/907dave9/Multimediamessage.jpg





Its pretty rough, done by the previous owner but gives you a good idea of how it can be done.

[Lococoin]

thanks!