I cant seem to get the burner to burn?

[bsdracing]

I cant seem to get the burner to burn the new chip when i open the pheonix flash FU it opens and the first thing I see is 1 highlighted and blank and the rest are blank it says its connected as it should be and has the connected COM 4 and the PID 'BC'- CID 'BC' - FID 'FC' is this what it should be like because the user guide looks different than the screen i see when opened any help would be great need this stuff going its been a month already :shrug:

[cleatus12r]

Russ,

What you need to do is load your files from the hard drive.

Basic rundown:

Use the "]" (right bracket) and "Tab" key to scroll through all 6 positions so they say Load File From Disk.

Hit the Tab key one more time to where it highlights the picture of the chip in the lower left corner then follow the instructions.

[bsdracing]

im not sure what you are talking about with the "]" bracket but when i have the burner and chip installed it says connected COM 4 and the code on the right and both the chips on the bottom are blue and highlighted but it wont let me do anything if I click on them it says error and contact PHP:help::shrug::hmmm:

[bsdracing]

how do i do a screen sho of my computer? when i hook up burner with chip in it i have chip installed in burner then plug USB in and last the power supply and then the light goes green and I click to open the phoenix flash FU and it opens and then highlights the chips on the bottom and it has the six slots that look like you would click and drop down the menu and the fist one is highlighted but I cant do anything else and also the burner light turns red and green?:hmmm:

[bsdracing]

I now know what yoru talking about with the tab and the ] but it just goes from the position one to the highlighted chip on the left then the one to the right and then back to the 1st position

[cleatus12r]

So it allows you to toggle between only the first position and the two icons on the bottom of the window?

[bsdracing]

Do i need to have an access code for this? it says the programmer ID 'BC' is not authorized for use with this software. please contact php for assistance? and then if I go up to "help" the fist thing it says is "activate software and if i click it, it says activation code?

[bsdracing]

So it allows you to toggle between only the first position and the two icons on the bottom of the window?

yes if it is just chip without switch or with it

[cleatus12r]

Yeah, because even with no chip in my burner here, I am still able to toggle through all 6 slots. Something smells fishy.

I'll see if Bill has an idea.............................................. ..................

[bsdracing]

yeah mine acts the same with chip in or out it even highlights the chips at the bottom:cursin:

[cleatus12r]

Bill doesn't see where you have activated your PF software.......

He's going to email you a code for the Phoenix Flash activations.

[bsdracing]

alright well got it registered and everything still no success same issue live support would be great I emailed bill or any other ideas would be grately appreciated

[bsdracing]

I still have no good news with getting the burner to work or getting tunes from bill anyone have anything that could help? its been over a month and not had one tune on my truck :twitch:

[bsdracing]

can anyone help me with this I need to get the tunes from bill and get the burner going I dont see what I could have done wrong when installing but it just wont work it is activated but same problem

[cleatus12r]

I alerted Bill of your concern. Unfortunately, I am out of ideas and he's the one you need to talk to. He's going to be gone tomorrow so hopefully he'll get ahold of you tonight.

[bsdracing]

yeah tonight would be great i have called many times an left a message on his cell phone i just need this stuff going :help:

[bsdracing]

ALRIGHT ALL IS GOOD Bill got it working nothing that he or the burner were doing just me having a brain fart I guess so now I am playing with tunes and its great thanks to all that helped :thumbs up yellow::happy-dancing:

[cleatus12r]

Ok Russ, I got a couple of tunes (just altered fuel/SOI) written up for you to try. They may be a bit rough around the edges, but you certainly should be able to drive them.

[bsdracing]

AWSOME!!! pretty much all i have been doing all day is playing with the lope tune any pointers to get the romps to be more spread out?

[bsdracing]

oh and tell bill I got the idle lower it was just still cold it runs great now

[907DAVE]

AWSOME!!! pretty much all i have been doing all day is playing with the lope tune any pointers to get the romps to be more spread out?

Try spreading out the ICP in the "Romp" ranges.

[bsdracing]

what do you mean by "spreading them out"? through the rpm or pressure?

[907DAVE]

Both......hold on a sec.

[907DAVE]

So apparently my windows paint program was deleted when I douched out the PC this weekend.

I will get you a screen shot later.

[bsdracing]

how do i do screen shots also i will be moving this to the fun tuning thread I started or at least continuing the conversation there

[907DAVE]

Got a new paint installed, here ya go......

http://i619.photobucket.com/albums/tt274/907dave9/LOPE.jpg


I am not sure if this will work, but was an idea I had about making it romp with less frequency.

I am pretty sure you can get a lope by screwing(up) the PW map. I realize this after running stock tuning with my singles.

[907DAVE]

You hit the FN and SysRq to get your screen shot, then paste into your paint program. Save then upload to photobucket.

To the fun thread......

[bsdracing]

this is the cant get burner working thread and I already started a little wile ago fun tuning how to and if anyone was wanting to know how to do this like me they probably wont see it unless by accident so i was gonna post in the other thread "fun tuning how to?"