Keith
Sat, January 15th, 2011, 02:05 PM
I have a 2002 F250 7.3L with 140,000 miles. The only 3 mods are a cold air intake, 4 inch exhaust (turbo back), and an edge evolution programmer.
It is time to replace the stock injectors. While I am at it, I am going to upgrade the HPOP, add Water injection (not Meth) to keep the EGT's down, and get some custom tunes.
This is a daily driver truck that will be used for some heavy towing time to time (12,000lbs+).
I am looking at stage 2 160cc single shot injectors and a stage 1 Stealth HPOP (Ford PowerStroke 7.3 Stealth HPOP (http://www.dpppower.com/73-hpop.html)). I am not sure on injector brand or if the Stealth HPOP is the best route to go.
I am new to all this, so I am looking for some advice on how to get this done in a timely manner and where to buy the parts. I want the extra power and towing ability, but dependability and quality are key.
Also, I would like to hear comments on my thought process with the next round of upgrades I have planned. Am I on the right track or should I take a different approach?
It is time to replace the stock injectors. While I am at it, I am going to upgrade the HPOP, add Water injection (not Meth) to keep the EGT's down, and get some custom tunes.
This is a daily driver truck that will be used for some heavy towing time to time (12,000lbs+).
I am looking at stage 2 160cc single shot injectors and a stage 1 Stealth HPOP (Ford PowerStroke 7.3 Stealth HPOP (http://www.dpppower.com/73-hpop.html)). I am not sure on injector brand or if the Stealth HPOP is the best route to go.
I am new to all this, so I am looking for some advice on how to get this done in a timely manner and where to buy the parts. I want the extra power and towing ability, but dependability and quality are key.
Also, I would like to hear comments on my thought process with the next round of upgrades I have planned. Am I on the right track or should I take a different approach?