PDA

View Full Version : Disconnection question?


iHellFire
Sun, June 12th, 2011, 08:19 PM
Hey guys,

just dropped my truck off for the night at my local shop to get worked on in the morning and before I left, I decided to unplug my Gryphon and take it with me. I didn't set the truck back to stock and was wondering if I need to take it back over there and set it back to stock or if the truck will be fine with the set tune without the Gryphon plugged in. Thanks!

Jackpine
Sun, June 12th, 2011, 09:02 PM
Hey guys,

just dropped my truck off for the night at my local shop to get worked on in the morning and before I left, I decided to unplug my Gryphon and take it with me. I didn't set the truck back to stock and was wondering if I need to take it back over there and set it back to stock or if the truck will be fine with the set tune without the Gryphon plugged in. Thanks!

It will be fine as long as they don't flash the PCM. If this is not a dealership, I doubt that's a problem.

- Jack

iHellFire
Sun, June 12th, 2011, 11:03 PM
Ok cool. No flashing of the PCM. I am getting the passenger side exhaust manifold gasket replaced...but he has to lift the engine slightly to get to the manifold but that has nothing to do with the computer.