azor
Mon, July 11th, 2011, 03:35 PM
I have a set of Stage 1 injectors and Phoenix chip coming from Jim Rose. I did the 10k (actually 15k) mod a few months ago. Should I do away with this mod before installation of the Phoenix chip?
Thanks in advance for your response!
cleatus12r
Mon, July 11th, 2011, 04:47 PM
You can. If you want, you can drive it that way and see how you like it. Just keep in mind that the programming already raises the injection pressure so there really is no need to keep the resistor in the injection pressure sensor wire.
azor
Tue, July 12th, 2011, 07:05 PM
Okay, thanks for the quick reply. I'm going to restore it to it's normal state.