North Jersey here

[nine5flareside]

I live in Northern NJ about 5 minutes from NYC. I have a 1995 F150 flareside with a few engine mods and I was interested in putting one of the PHP prducts in my truck for better performance.
What I have done:
All aluminum radiator
Dual electric fans
Msd ignition systen (igntion control box and coil)
K&N cold air intake system
BBK throttle body
Edelbrock 5.0 EFI truck intake manifold
Ford racing 1.7 rockers
Aluminum underdrive pulley kit
Bassani ceramic coated headers to 2 1/2" pipe
Hypertech chip
Cat removed
Smog pump removed
EGR removed
Tach installed

Only other major thing that I havent done is new heads.
I think I will just upgrade to GT40 heads.
Stock cam etc.

Now what line of products would work best for me from PHP.
I hope this isnt a dumb first question! Thanks for any help.

[JWBFX4]

Wow it looks like you have done a lot to the truck, welcome to the site :howdy:

[88Racing]

Nice list of mods!

Welcome to the forum!

Lars
:cool_beans:

[nine5flareside]

Thanks for the replies guys... so what should I be looking into as far as products from this site?

[tg150]

NNJ'er here also..:2thumbs: Passaic Cnty..Welcome to the sight :howdy:

[Afrancis]

Welcome man.:howdy: I would say go for a Gryphon, Bill will help you decide on which custom tunes is best for your truck.

[Jackpine]

Welcome from me too! :howdy: Your situation is a bit unique and I think Bill is the only one I'd trust to give good advice on a programmer/chip. :shrug: The cool thing about it is though, you can take everything he says to the bank! :thumbs up yellow:

- Jack

[nine5flareside]

Welcome from me too! :howdy: Your situation is a bit unique and I think Bill is the only one I'd trust to give good advice on a programmer/chip. :shrug: The cool thing about it is though, you can take everything he says to the bank! :thumbs up yellow:

- Jack

LOL what makes my situation a bit unigue... that made me laugh!
I feel wierd now... in a unique sort of way that is! Thanks
again for all the input guys!

My truck is OBD 1 so I dont know about the gyphon.

[nine5flareside]

NNJ'er here also..:2thumbs: Passaic Cnty..Welcome to the sight :howdy:

Im on fordf150.net stop by... theres a few north jersey heads there. I have the same name nine5flareside. And theres pics of my truck.

[kokopellimotorsports]

Welcome to the site. Nice to have you.

Ty

[secondarychaos]

:welcome:
Do you have an Emmisions check in Jersey?
it's a nice list of mods, but you'd have to undo most of them every two years if you lived here LOL :smiley_roll1:

[nine5flareside]

:welcome3: Northern New Jersey! We're glad you're here!

(I'll have to get you to overnight some bagels to us.) :cheesy smile:

Actually, My Parole Officer (GF) lives in Brooklyn, NY and there is a bagel place there that makes really soft fresh bagels that stay soft for days. Im sure we can work something out!

:2thumbs:

[nine5flareside]

:welcome:
Do you have an Emmisions check in Jersey?
it's a nice list of mods, but you'd have to undo most of them every two years if you lived here LOL :smiley_roll1:

Emmisions who? What is that? :whistle1:

[Power Hungry]

You will definitely be looking at the Phoenix Module for your truck due to the OBD1 system.

As for the modifications, we can handle everything listed except for the Hypertech chip. ;)

Let us know when you decide on changing the heads. You might want to hold off and we can cover everything in one shot.

Also, any particular reason to not change the cam? Comp Cams has a nice cam that you may want to look into (XE270HR) that works with computer systems and head modifications. There are a few more aggressive ones as well, it just depends on what you're looking for.

Take care.