PDA

View Full Version : 478hp/851 ft-lbs on PMR's


Pocket
Sat, July 28th, 2012, 08:41 PM
Hallers brought out their mobile dyno to the Courtesy Ford dealer here in Littleton. Truck put down a nice show, and held together.

https://www.youtube.com/watch?v=MJ7DvKNwo3k

Sorry in advance for the upside down dyno sheet. For some reason it's correct on my phone and my laptop, but uploads upside down. Not sure why. Also the torque didn't register correctly on the first run, but the others are pretty consistent.

http://powerstrokearmy.com/photopost/data/500/medium/2012-07-28_11-29-56_847.jpg


Thank you PHP for all your help getting my truck to run where it's at today!

808diesel
Sat, July 28th, 2012, 11:39 PM
Nice!!! What mods do you have done?

Pocket
Mon, July 30th, 2012, 08:35 AM
Nice!!! What mods do you have done?

250/200 FFD hybrids, 38R, intake, exhaust, 6.0L intercooler, Walbro pump and fuel bowl delete, BTS, 6" lift with 4.30s, and a few other small stuff.

Still on the stock bottom end, no head studs, and no springs.