Power Hungry Performance Forum
Page 3 of 3 12 3
Show 100 post(s) from this thread on one page

Power Hungry Performance Forum (http://forum.gopowerhungry.com/forum/index.php)
-   6.0L PSD FICM Reprogramming (http://forum.gopowerhungry.com/forum/forumdisplay.php?f=113)
-   -   New FICM Calibration (http://forum.gopowerhungry.com/forum/showthread.php?t=1258)

npccpartsman Thu, August 13th, 2009 11:12 AM
Quote:
Originally Posted by Power Hungry (Post 13890)
Just to clarify, you are confusing the ECM calibrations (TBS6, FSM8) with a FICM strategy. ECMs do not handle the inductive heating, which is controlled entirely in the FICM.

To answer your question, we can reflash the PCM, TCM and/or FICM to any strategy you desire, including reversion to an earlier (non-inductive) FICM strategy.

Hope this helps.
I guess I am a little confused Bill. I was under the impression that the ECM/FICM programming still had to be compatible with each other for the engine to run correctly. i.e. so that one would know the "address" of the other's programming. LOL--maybe I'm just :notallthere: I do know that the FICM is entirely responsible for the heating. I think I'll just give you a call later today and you can put an end to my confusion.

Thanks very much for your prompt reply :thumbs up yellow:

HeavyAssault Thu, August 13th, 2009 03:07 PM
Quote:
Originally Posted by Power Hungry (Post 13890)
Just to clarify, you are confusing the ECM calibrations (TBS6, FSM8) with a FICM strategy. ECMs do not handle the inductive heating, which is controlled entirely in the FICM.

To answer your question, we can reflash the PCM, TCM and/or FICM to any strategy you desire, including reversion to an earlier (non-inductive) FICM strategy.

Hope this helps.
So is it possible to run the older TOW/HAUL TCM stragety that was a bit more agressive on each downshift?

I loved this on my '04 before they reflashed it.

npccpartsman Thu, August 13th, 2009 06:01 PM
Quote:
Originally Posted by HeavyAssault (Post 13910)
So is it possible to run the older TOW/HAUL TCM stragety that was a bit more agressive on each downshift?

I loved this on my '04 before they reflashed it.
I'd love to know this too, cause I have some older files I'd love to run that I'm told wouldn't work with the newer flashes.

Jeremy Fri, August 21st, 2009 03:40 PM
It would be nice to have the 2-1 downshift and the constantly locked T/C, that the 03's and early 04's had, in the 05-07's. hint...hint... :cheesy smile:

npccpartsman Mon, August 31st, 2009 09:48 AM
One other question for Bill:

Will a FICM flash throw any kind of a compatability code if it's not done with the PCM?

mr.c Mon, August 31st, 2009 03:28 PM
I am not Bill but can say that mine does show a incompatability code. 2004 model year F350

Jeremy Tue, September 1st, 2009 08:30 PM
I have it to U306 I believe. I just ignore it and the PO401 (lack of EGR flow) LOL


All times are GMT -5. The time now is 03:41 PM.
Page 3 of 3 12 3
Show 100 post(s) from this thread on one page


All Contents Copyright 2008-2020, Power Hungry Performance