OBS Pictures ?
 

Post pictures of your superduty or OBS!

Power Hungry stickers are a Bonus!:2thumbs:

Heres one of mine, For Sale in california if any one is interested ;)
http://i122.photobucket.com/albums/o...Picture004.jpg

And my baby

http://i122.photobucket.com/albums/o...l/DSC_0291.jpg
http://i122.photobucket.com/albums/o...l/DSC_0210.jpg

Beautiful truck! Love the pictures, especially the one with the headlights on.

Here's a teaser pic of my old 95 and the Super Duty that replaced it.

Great looking trucks.

Thanks Corey

cleatus12r That thing is a monsta! whats the deal with the SD? Looks untouched :shrug:

did Bill ever buy the one with 15kmiles or whatever?

Yeah......

I sold that 95 for a song. I had to have a truck that was useful and the "monster truck" wasn't that truck. :sigh:

I haven't done anything like that since........

The 01 is a work truck.

Nice, I'm not personally In to the big lifted trucks, But Its always cool to see the mods/creativity put in to the projects,

I'm shootin for 2inch body lift with 35"s

No more OBS psd's ?

Only pic I got of mine at the moment.


http://www.oldengine.org/members/loz...isc/f350_1.jpg

Bamboo,

Love the International emblem on your grille! I think some gameroom points are in order for that one. :)

100 points added to each who posted a pic. Another 25 to bamboo cuz the emblem is cool!

Heres mine:

http://i307.photobucket.com/albums/n...ewtruck002.jpg

John,

Nice looking truck ya got there. The red & white is a really good combination. :D

$100 Gameroom dollars to you for your submission.

Enjoy.

Here's my 97...

Some nice OBS trucks you guys have! I love the OBS...

I agree. The red/white/red is really sharp.

Here's a cell phone shot a while ago. Not the best resolution but is works. Mods include: 3" downpipe to 4" exhaust, 6637 Napa air filter, EGT and boost gauge, and will have Phoenix module installed tomorrow courtesy of my Minotaur software. Very happy with it. Last 3 fuel fill ups have averaged 20+ with 4.10 gears and 5 speed manual.

http://i388.photobucket.com/albums/o...850A0082-1.jpg

Here is mine-
I am the original owner.

http://www.hotboatpics.com/pics/data...ale_shot_5.jpg

Thank you both for the compitments.

Whish I could say the same about mine. Nice truck, looks great.

Diggin the CC SB , My dream truck right there with the XLT and 5speed

And thanks for the Bonus points Bill!


Keep um postin!:2thumbs:

A couple that I found.

Finally got some of mine doing something besides looking sexy. :drool2: On board is 2200lbs of precision xyz stages.

http://www.oldengine.org/members/loz...c/hauling1.jpg

http://www.oldengine.org/members/loz...c/hauling2.jpg

ok, heres an updated one playing with the camera :2thumbs:

http://i122.photobucket.com/albums/o...l/DSC_0215.jpg
http://i122.photobucket.com/albums/o...l/DSC_0209.jpg

Patch,

Man is that ever sexy! Love the palm trees in the background. Whose the person off to the right in the second picture? Casual bystander? Waldo?

Verde
 

My first diesel.:fordsm:
http://i134.photobucket.com/albums/q...lffy/VERDE.jpg
http://i134.photobucket.com/albums/q...y/VERDE004.jpg

Looking good Wollffy!

Damn I wish I could convert mine to a crew cab :(

Thanks Bamboo, Those pics of yours on the beach are sweet:thumbs up yellow:

Hey guys I am new around here and just ordered my php chip and burner.

Here is my rig.

http://i304.photobucket.com/albums/n...y/P9230065.jpg
http://i304.photobucket.com/albums/n...y/P9150062.jpg
http://i304.photobucket.com/albums/n...y/P9090059.jpg

Nice truck Oasis! What kind of center console is that? Looks sweet!:2thumbs:

Looks like one out of an 08.

Oasis, Nice truck, Diggin the console too
How easy is it to shift with it? any way to move it back a little maybe ..?

Pretty sweet..

Shifting is not a problem at all. the only restriction is you cant put a big cup like in the pic into the left side cup holder. if it were moved back then the arm rest would be to far back for me, as well as it is mounted in the factory holes so the alignment was kinda predetermined with the seat rail position.

Hmmm, I think I might have to swap out my center seat for one of those!

My 97 OBS
 

Here she is. Pheonix on the way. Can't wait!

Looks great!

How was the install? Any tips?

seriously it was the easiest install for me. I do not have a power seat so I have two parrallel bars which happens to match the dimension of the bolt hole in th console. All I had to do was center it between seat and center punch bolt holes drill and bolt up. I did not hook up the power points yet. Prep work took much longer than the actual install. It comes tan so I died it gray, then had to assemble the console. Remove old seat consolw, vacuum, assemble console, install and reinstall seat floor bolts took maybe 1.5 hrs and that includes a couple of smoke breaks.

Good deal! Thanks for the info.

Mine's in the Sig...

Cool, Whats the history of the paintjob? :smiley_roll1:

The history....

Well the truck was a dually when I bought it. White with a metallic dark blue stripe.
Didn't need a dually, just got a good deal on it, so I swapped the rear axle, bed, and front hub/rotors. The new bed was a different color and my factory paint on the cab looked like crap.

So I did some body work on the bed, primered it, painted everything white, and I love the white with red stripe look...

So I did the cab with the red... but then the weather got bad and I hanv't had a chance to finish. I don't have a garage or a shop to work in. :shrug:

Brownie

Semper Fi!!!

How did you apply the white to the front grill? did you spray over the chrome or get a black xl grill to paint?

I was thinking of whiting my grill out.

I got an XL grill to do mine also the headlight bezel.

Thanks
I have a 95 xl 1/2 ton maybe I could swap them out and paint the xl grill and bezel and put the chrome on th 150?

Yes you can do that. What color is yours? I did mine with the Krylon plastic paint, it matches up pretty good. Cant tell a difference 20 ft away.

My diesel is white. My 1/2 ton is dark green with a hint of oxidation.:doh:

Yut! Semper Fi!

I used a adhesion promoter, and then white krylon plastic paint over the chrome XLT grill (my chrome was halfway gone anyways).

It was good for a coupld months but then it's starting to flake off the chrome parts now. I'd get a XL grill and do it if you want to go that route.

I actually am wanting to go back to the chrome grill, either stock XLT chrome, ALL chrome stock grill (looks sweet), or a billet grill

Mine was like this before the incident.

See, I like that look on some trucks, but I'm not patient enough to tape off all the chrome... haha

I like the chrome and white as well. I too am not patient enough to mask it off.

Your Marines and not patient:disbelief: Actually it wasnt that bad I had the whole thing done in a couple hours. Its easier to overlap the tape and then use a hobby knife and trim it out, that part took me a whole 30 minutes.

Nice trucks guys

That must be a newer OBS???:hehe:

He forgot to mention the body swap. :disbelief:

Nice truck Though..

my bad guys. I didnt even notice that. Ill fix it.

More pics of the ol' girl.
3" down pipe, 5" straight pipe, 7" stack
http://i304.photobucket.com/albums/n...y/P2170279.jpg
http://i304.photobucket.com/albums/n...y/P2170277.jpg
http://i304.photobucket.com/albums/n...y/P2170276.jpg
http://i304.photobucket.com/albums/n...y/P2170275.jpg

Looks great Jeff :cool:

And thanks for turning me on to PHP Tuning :thumbs up yellow:

Thanks JP. Glad you are as pleased with the FU as I am.

Can't believe this thread is so dead.
Here is my latest mod.

Before:
http://i304.photobucket.com/albums/n...y/PA220089.jpg

after:

http://i304.photobucket.com/albums/n...y/P4020351.jpg
http://i304.photobucket.com/albums/n...y/P4020350.jpg

Nice headlight swap Jeff. I did that on mine too. If you look back I've only done a few exterior mods since last time a put up a picture. Those would be the KC daylighters and factory aluminum wheel over steel since last time.

http://i388.photobucket.com/albums/o...9/IMG_0211.jpg

Since the divorce seems immenent, I had to get my own powerstroke while surrendering my '01 Super Duty to the ex.

Here's how she looks right now, first day home. 223K miles, auto.

http://i641.photobucket.com/albums/u...r/DSCN2388.jpg
http://i641.photobucket.com/albums/u...r/DSCN2387.jpg
http://i641.photobucket.com/albums/u...r/DSCN2386.jpg

So far I've put two idler pulleys on it (dead bearings), changed all fluids, greased everything, adjusted the IVS switch stop (3/8" of travel before releasing!!!) and made a quickie 5-minute tune for it since the Superchips programmer is going bye-bye (and I now know why I preferred the Evo. that I used to have over the Superchips ).
I remembered why I hate 4.10 gears too.

Nice looking rig Cody. I wouldn't have guessed it had 223k by the looks of it. I was wondering how long that superchips programmer would last when I saw it.:giggle:

4.10s haven't disappointed me too much, I'm impressed with my mileage and towing ability. Granted, the majority of my driving is around 60mph.

It is what it is and after looking at 6 trucks, this one seemed like the best deal. I did have to make a bypass valve for the oil filter housing since the original was long gone.....:doh:

I guess now I have to decide on injectors....not that there's anything wrong with the stockers yet except that they're a little "weak". I think I'll get ahold of Jim Rose and see about some 238/80's one of these days. Bye bye E4OD.

Sounds like a case of PMS is beginning on the new ride... the truck related kind. :hehe:

Are going to put a manual tranny in? I put a 6 speed (was a 5 speed) in my Father '94 F350 with 4.10 it made a big difference.

are those head light assemblys from an '03 and up Superduty

Nahh......aftermarket sells clear corners and lenses. Pretty sharp though.

1997 F-350 4x4 XLT
 

My 97' F350 7.3

Finally broke down and masked off my grill and got the inset painted.

Before:
http://i304.photobucket.com/albums/n...y/P4020350.jpg
http://i304.photobucket.com/albums/n...y/P4020351.jpg

After:
http://i304.photobucket.com/albums/n...y/P6270368.jpg
http://i304.photobucket.com/albums/n...y/P6270367.jpg

Lookin good Jeff!

Ill get some pics as soon as I do my full detail!
maybe a video when I get my new tunes

Here's the new rig(in May) I've been playing with. First platform that's needed custom tunes, Minotaur is handy for that. :)
Took a picture for Ranch Hand's photo contest. Wish I would have submitted this photo instead of the one I did.
Soon to get a rear window decal...
7.3L Power Stroke Tuned by: yada yada yada (ME!)

http://i388.photobucket.com/albums/o...G_0295edit.jpg

Looks really low cause of the grass but there she is....

http://i624.photobucket.com/albums/t...s/DSC_0073.jpg

Brought my skidsteer over to my house today. Yes my 9yo son is horsin around in all three pics I snapped.

http://i304.photobucket.com/albums/n...arley/tow3.jpg
http://i304.photobucket.com/albums/n...arley/tow2.jpg
http://i304.photobucket.com/albums/n...arley/tow1.jpg

seen the rig before but new angles.

http://i304.photobucket.com/albums/n...ley/pic1-1.jpg
http://i304.photobucket.com/albums/n...ley/pic2-1.jpg
http://i304.photobucket.com/albums/n...ley/pic3-1.jpg

http://www.topendfabrication.com/gal...serialNumber=1
http://www.topendfabrication.com/gal...serialNumber=1

Couple pictures of my old heap.

http://i106.photobucket.com/albums/m...9/DSCN0521.jpg

http://i106.photobucket.com/albums/m...ber8200903.jpg

http://i106.photobucket.com/albums/m...ber8200901.jpg

http://i106.photobucket.com/albums/m...mber242009.jpg

PSN callender picture:

http://i106.photobucket.com/albums/m...ics/Image5.jpg

Old Workhorse
 

My truck back in june 2010 just after work. What a great truck its been.

Seen it before but here is my rig on the gooseneck instead of tag-along.

http://i304.photobucket.com/albums/n...earley/tow.jpg
http://i304.photobucket.com/albums/n...arley/tow4.jpg
http://i304.photobucket.com/albums/n.../ricksload.jpg

I really like the stance of your truck! How did you accomplish it? (lift, brand, tire size, etc.)

This was taken a few years ago, its a little worse for wear nowhttp://im1.shutterfly.com/media/47a1...D720/ry%3D480/

Nice...!:thumbs up yellow:

Heres my newly acquired 97 2wd. Shes exceptionally clean IMO. Bought it last sunday and so far this week I got it straight piped an got a wix 46637 filter:cheesy smile: The downpipe is on its way and a phoenix is in the works as well.

http://i148.photobucket.com/albums/s...10222-1322.jpg

Just added the the lund visor.
I have clear lenses and amber leds to put in but haven't done that yet.

http://i304.photobucket.com/albums/n...ley/visor2.jpg
http://i304.photobucket.com/albums/n...ley/visor3.jpg
http://i304.photobucket.com/albums/n...ley/visor1.jpg
http://i304.photobucket.com/albums/n...visornight.jpg
http://i304.photobucket.com/albums/n...isornight1.jpg

My custom 97 7.3L Build
 

Its a 97 Regular Cab Long Box, took 30" out of the box a threw a 92 crew cab on it, with 2005 leather seat front and back, and wiring harness and rear doors off a 97 f350. Runs 14.6 in the quarter mile too. Customed tuned by Bill. Thanks Bill! :thumbs up yellow:

^^^^^^^
That is awesome.:thumbs up yellow::cheesy smile:

Here's a couple pics of mine..

http://i1194.photobucket.com/albums/.../untitled7.jpg

http://i1194.photobucket.com/albums/.../WP_000135.jpg

These 2 are recent. Pulled the bullhaulers off for a 6" single

http://i1194.photobucket.com/albums/.../WP_000173.jpg

http://i1194.photobucket.com/albums/...000019700b.jpg

Just took 5 Cows to the auction.:thumbs up yellow:

http://i304.photobucket.com/albums/n...arley/zpic.jpg
http://i304.photobucket.com/albums/n...rley/zpic1.jpg

Got the clear lenses and led's installed in my cab visor.

Before:
http://i304.photobucket.com/albums/n...ley/visor1.jpg
After:
http://i304.photobucket.com/albums/n...ley/zlense.jpg
http://i304.photobucket.com/albums/n...ey/zlense1.jpg
http://i304.photobucket.com/albums/n...ey/zlense2.jpg

Actually dont like the look as much as I thought I would.
waiting to see the leds at night. I may put the amber lenses back on.

Beautiful OBS, I want one more every day.

Thanks, definately a work in progress.

Good and Stuck
 

Heres a couple of my proudest moments. Installed my FU chip today and lovin it.