Power Hungry Performance Forum
Page 1 of 2 1 2
Show 100 post(s) from this thread on one page

Power Hungry Performance Forum (http://forum.gopowerhungry.com/forum/index.php)
-   1999 to 2003 7.3L Power Stroke Diesel (http://forum.gopowerhungry.com/forum/forumdisplay.php?f=25)
-   -   Prices? (http://forum.gopowerhungry.com/forum/showthread.php?t=6313)

shorty2tall Sat, April 9th, 2011 01:05 AM
Prices?
 
So I'm looking at getting a used 7.3 no hpump or injectors and heat cracks in pistons for $850?
And I big oil for 1750?
What do y'all think on prices? High, low, just right?

rammertide07 Sat, April 9th, 2011 09:58 PM
Are you wanting this truck to get back to driving? Sounds like a good price for a parts truck. I wouldn't touch it. No telling from here what kind of condition the drivetrain.

shorty2tall Sun, April 10th, 2011 05:41 PM
Prices?
 
No it's just a used engine and big oil that's it

dietoremain Mon, April 11th, 2011 01:42 AM
walk away.. no hpop or injectors? psh whats left to use, lol. not worth crap.

shorty2tall Mon, April 11th, 2011 11:57 AM
Prices?
 
The forged rods are left I have pmr's and that way I can just rebuild it then it my injectors and hpump on it but the price seems high

ToMang07 Mon, April 11th, 2011 12:14 PM
Quote:
Originally Posted by shorty2tall (Post 46633)
The forged rods are left I have pmr's and that way I can just rebuild it then it my injectors and hpump on it but the price seems high
Honeslty, unless you are doing some crazy build for competition, I would say it's really not worth the money.

You can go 400-450(MAX) on PMR's, and Forged only gives you an aditional 100HP, but you would have to have everything else upgraded first,HPOP, fuel delivery, Stage 2 injectors, bigger turbo, custom tuned, etc.

And unless you alredy have the money/ability to pull the engine and rebuild yourself, I would say it isn't worth the dough. IMHO.

shorty2tall Mon, April 11th, 2011 12:34 PM
Prices?
 
Well I already have the turbo a garrett ball bearing and my goal is 500 but I guess I could wait lol I'm young not too much of a rush. What stage injectors would get me to the 400-450 range?

ToMang07 Mon, April 11th, 2011 01:01 PM
Quote:
Originally Posted by shorty2tall (Post 46639)
Well I already have the turbo a garrett ball bearing and my goal is 500 but I guess I could wait lol I'm young not too much of a rush. What stage injectors would get me to the 400-450 range?
I believe 350 RWHP is the MAX with stock sticks... I'm no expert, but I believe for much over 400 you need stage 2's and all the goodies to go along with them.

bml Mon, April 11th, 2011 05:34 PM
Quote:
Originally Posted by ToMang07 (Post 46636)

You can go 400-450(MAX) on PMR's, and Forged only gives you an aditional 100HP

I'm still a novice, so please bear with me. What rods do the folks with the huge HP and TQ numbers use??

shorty2tall Mon, April 11th, 2011 06:22 PM
Prices?
 
Most the guys I know that are around 500 HP have stock forged rods. But either late in 2000 or in 01 they went to pmr (powder metal rods). The pmr's break easier under high cylinder pressures. Some with forged rods get them cryo treated. It makes them stronger. This is why I want either a new block or do a rod swap so I can hit my 500 HP goal cuz the truck I have has pmr's.
500hp really isn't that hard to hit just about 10-15k depending on turbo u go with. Injectors, trans, Turbo, head studs, Hpump, and ur there! If u go with hybrid injectors I believe u can stick to ur stock pump but an upgraded one is better.
I am no export this is just stuff I've learned over time surfing forums lol and asking questions and there are u stupid questions!


All times are GMT -5. The time now is 09:16 PM.
Page 1 of 2 1 2
Show 100 post(s) from this thread on one page


All Contents Copyright 2008-2020, Power Hungry Performance