Power Hungry Performance Forum

Power Hungry Performance Forum (http://forum.gopowerhungry.com/forum/index.php)
-   2009 to 2014 F-150 (http://forum.gopowerhungry.com/forum/forumdisplay.php?f=14)
-   -   6-speed tranny gear ratios? (http://forum.gopowerhungry.com/forum/showthread.php?t=4299)

shotgun Thu, May 6th, 2010 08:34 AM

6-speed tranny gear ratios?
 
I'm pretty darn sure I saw a post that listed the 09-10 6-speed tranny gear ratios, but I can't seem to find it...:shrug:

Can anyone :help: me out? Please?

Thanks!

MGDfan Junior V1.0

:cheesy smile:

cleatus12r Thu, May 6th, 2010 08:56 AM

From what seems to be a reputable website:

2010 F-150


1st: 4.17:1
2nd: 2.34:1
3rd: 1.52:1
4th: 1.14:1
5th: .86:1
6th: .69:1

Hope this helps.

shotgun Thu, May 6th, 2010 08:57 AM

:thumbs up yellow:

Thank you sir!

cleatus12r Thu, May 6th, 2010 09:00 AM

To me, everything looks great except the ridiculous split between 4th and 5th and that unreasonably high 6th gear.....IN A TRUCK.

shotgun Thu, May 6th, 2010 09:07 AM

Quote:

Originally Posted by cleatus12r (Post 32302)
To me, everything looks great except the ridiculous split between 4th and 5th

You can definitely feel it when you're on the interstate on-ramp, especially when you couple it with the throttle lag.

As soon as the SCT or Edge is ready for the 09-10s... :whistle1:

Quote:

Originally Posted by cleatus12r (Post 32302)
and that unreasonably high 6th gear.....IN A TRUCK.

I'm pretty sure this is how they're trying to squeeze every last MPG out of the 5.4L.

SportTractoF150 Thu, May 6th, 2010 12:51 PM

So my question is in reference to adding 35" tires to the truck.

I know in the 2004-2008 trucks with the 4 speed transmission, 35" tires and 4.56 gearing was pretty much the standard and perfect combination to make up for the power loss and to preserve the transmission.

With the current 2009+ trucks with the 6 speed transmission, what would be the equivalent? I've got a 2009 Platinum sitting on 35's...have been for a year. Should I be concerned about hurting the transmission or it dying prematurely on me? I have been toying the idea around of regearing, even after I pick up the new Gryphon CS or CTS, but I'm not quite sure on:

1) if it's needed to save the transmission
2) which gear ratio would be suitable with the 6 speed transmission.


Thanks!

Longshot270 Thu, May 6th, 2010 02:52 PM

I would definitely get a regear with the 4.56 gears since it has been working out for most vehicles. I'm not sure what your truck came with (I dont think they changed anything though) but look around and find a ratio that will bring it to a little bit (and I mean a little bit) higher than stock. All the regear does is bring the final ratio back to what it should be so it doesn't matter what your transmission is. When you regear the driveshaft and everything ahead of it should be turning at nearly the same speed as it was before the bigger tires.


All times are GMT -5. The time now is 05:05 PM.


All Contents Copyright 2008-2020, Power Hungry Performance