Gryphon programmer screen is unreadable
3 Attachment(s)
I've been running program 1 for a few months now just as a comparison for fuel economy between the 3. Today I went to return my truck to Program 3 and the programmer suddenly locked up before I was able to set it. The screen looked like the pics I have attached. When I turn the key off the programmer remains on. The only way to turn the power off is to unplug it. Once I plug it back in and put the key in the on position, photo 2 shows first. Notice at the bottom of photo 2 it says Warnings remaining:251. I'm unsure what warnings they are referring to. Once I press <enter> photo 3 appears. Once photo 3 vanishes Photo 1 appears on the screen & that is where it freezes up. I don't know what to do. I have it unplugged right now. Anyone else had this problem?
|
Replace the truck's battery.......its a sign that's its going bad.....
The other thing is it should be plugged in when the key is ON.....not the other way around |
Why am I not seeing any signs elsewhere? Truck starts fine & everything is performing like it should. I replaced the battery about a year ago with a duralast gold. I'll do a load test on the battery to check it though. Also the programmer was working just fine until I push the button to reprogram it.
|
I'll leave a note also
|
2007 4.6L
|
Quote:
The other symptoms sound like a weak battery to me too. - Jack |
1 Attachment(s)
Ok I just went outside and tried it. I turned the ignition to the ON position, plugged the Gryphon into the diagnostic port, the unit power up and I pressed enter then it showed me my .hex file. I went to press enter again and nothing happened. Usually the buttons have a sound when you press them but once I press enter after it shows my .hex file name, the button sounds go away. Also I didn't mention this before, when I turn the ignition to the off position the programmer doesn't go off. I've included a pic of what the screen looks like when you look directly at it. I've been taking pics from about a 45 degree angle.
|
Please update your user cp to include phone number and hex code....http://forum.gopowerhungry.com/members/fordtuff247.html
|
Updated
|
I'll leave php a note.....
|
All times are GMT -5. The time now is 12:28 AM. |
All Contents Copyright 2008-2020, Power Hungry Performance