Power Hungry Performance Forum

Power Hungry Performance Forum (http://forum.gopowerhungry.com/forum/index.php)
-   6.0L PSD FICM Reprogramming (http://forum.gopowerhungry.com/forum/forumdisplay.php?f=113)
-   -   Edge Evolution 2 EEF2400 lot 050701 (http://forum.gopowerhungry.com/forum/showthread.php?t=9981)

Jahcure Thu, March 10th, 2022 01:11 PM

Edge Evolution 2 EEF2400 lot 050701
 
Hi I would like to know if this tuner can be converted to tune the ficm specifically with atlas 40 ?

if yes how do i proceed.

Thanks

Power Hungry Thu, March 10th, 2022 02:58 PM

What's the serial number of the device? Does it begin 200-xxx-xxx or 201-xxx-xxx?

Jahcure Thu, March 10th, 2022 03:29 PM

Quote:

Originally Posted by Power Hungry (Post 63056)
What's the serial number of the device? Does it begin 200-xxx-xxx or 201-xxx-xxx?

000008866 ver 6
date of 5/7/2007

i am currently looking to buy a this used device and the current owner says it was used on a 4.6l ford is this the serial number you were asking for or should i ask the owner to plug the deivce in to obtain the serial number on the device it self.

Thanks again :)

Test

https://scontent-bos3-1.xx.fbcdn.net...4A&oe=622E8827

Power Hungry Fri, March 11th, 2022 11:11 PM

That's the number I needed, but for some reason it's not coming up in Fusion.

What I need to know if it's a Type 2 or Type 3 device. Can you have the seller send you a picture of the OBD end of the cable? That'll tell me 100% which device it is.

Thanks!

Jahcure Sat, March 12th, 2022 09:33 PM

Quote:

Originally Posted by Power Hungry (Post 63059)
That's the number I needed, but for some reason it's not coming up in Fusion.

What I need to know if it's a Type 2 or Type 3 device. Can you have the seller send you a picture of the OBD end of the cable? That'll tell me 100% which device it is.

Thanks!

Hi Bill i asked for more pics but in the meantime please see this one below

Thanks

https://scontent-bos3-1.xx.fbcdn.net...WA&oe=6231986F

Jahcure Mon, March 14th, 2022 07:08 AM

https://scontent-bos3-1.xx.fbcdn.net...qQ&oe=6253C20F


https://scontent-bos3-1.xx.fbcdn.net...rQ&oe=62567676


https://scontent-bos3-1.xx.fbcdn.net...gQ&oe=6256AE40

Jahcure Wed, March 16th, 2022 07:49 AM

Quote:

Originally Posted by Power Hungry (Post 63059)
That's the number I needed, but for some reason it's not coming up in Fusion.

What I need to know if it's a Type 2 or Type 3 device. Can you have the seller send you a picture of the OBD end of the cable? That'll tell me 100% which device it is.

Thanks!

Hi Bill, are the pictures provide above good enough would this device be compatible ?

Thanks

Power Hungry Mon, March 21st, 2022 08:51 AM

Quote:

Originally Posted by Jahcure (Post 63064)
Hi Bill, are the pictures provide above good enough would this device be compatible ?

Thanks

I apologize for the delay. We have been out of town and our internet service was rubbish.

In any event, the device itself is compatible, but the cable is not. The cable pictured is for an early EEC style PCM used in the 97-03 F150 and 7.3L Power Stroke. You can use the device but you'll need to purchase the later CAN cable.

I hope this helps.


All times are GMT -5. The time now is 08:04 AM.


All Contents Copyright 2008-2020, Power Hungry Performance