Buckstop Bumper
 

Figured I'd make a post in here about my bumper.

Buckstop Truckware is located a few minutes south of Portland, Oregon. They build heavy duty winch bumpers that are 1/4" steel construction in the impact zone and 3/16" steel on the top. They are not the least expensive option for mounting a winch, but they are beefy bumpers. They offer the classic, baja and outback style bumpers. The bumper remains the same throughout the styles, the grille guard is what changes, which for the record is removable if you ever needed to service the rads or something and needed front access without removing the entire bumper.

Buckstop has super cheap shipping, flat rate of $75 anywhere in the US. They also have great deals on winches and lights as a package deal with the bumper.

I purchased a Outback Buckstop with Black Hammertone powder coating (acid washed first!). An additional pair of 6" light buckets (base model only comes with 1 pair of buckets. A WARN Industries 16.5ti Winch, and Hella 500 driving & fog lights.

Portland isn't very far from where I used to live up near Seattle so I just took the 6 hour drive down to pick it up myself, a road trip never hurt anyone. I also went down there because I was moving here to Wyoming within about a week and didn't want to rely on the freight company to deliver it in a timely manner.

Step one was to fuel the girl up for a road trip...
http://i1117.photobucket.com/albums/...6EE1BD4027.jpg

Step two was to make it through portland traffic.
http://i1117.photobucket.com/albums/...463B5F7D1C.jpg

Finally we made it and got it loaded up!
http://i1117.photobucket.com/albums/...463FCEBA0E.jpg

Having a forklift made it easy to load. Now how the heck do we get it out of the bed. Keep in mind it weighs about 250 pounds.
http://i1117.photobucket.com/albums/...C98DC6C2DF.jpg

You can see here that the grille guard bolts onto the bumper using supplied hardware.
http://i1117.photobucket.com/albums/...C98A8EBB1D.jpg

Bolted the grille guard up.
http://i1117.photobucket.com/albums/...C97E804570.jpg

Opened up the box from WARN, which itself weighs about 130 pounds.
http://i1117.photobucket.com/albums/...C97B7B6B48.jpg

One beast bolted up to another
http://i1117.photobucket.com/albums/...C97590F6BD.jpg

Yanked my old bumper off
http://i1117.photobucket.com/albums/...C9840342C3.jpg

Prepped again to be lifted up to bolt to the truck
http://i1117.photobucket.com/albums/...C972C4308B.jpg

It worked.. Kinda
http://i1117.photobucket.com/albums/...C96BA5A1E2.jpg

She's bolted up, only a few things left
http://i1117.photobucket.com/albums/...C963B8A8F4.jpg

Threw the lights on and called it a day.
http://i1117.photobucket.com/albums/...C957128E79.jpg

Wired everything up the next day. I hate wires so look away now if you like clean looking wiring.
http://i1117.photobucket.com/albums/...F6C8E249D0.jpg

Those switches sure do look nice next to that knob. :thumbs up yellow:
http://i1117.photobucket.com/albums/...F6D8F500E1.jpg

Lights working
http://i1117.photobucket.com/albums/...8C70C0372B.jpg
http://i1117.photobucket.com/albums/...8C778B702C.jpg

Two days later I made the 19 hour trip out here to Laramie.
http://sphotos-b.xx.fbcdn.net/hphoto...76983567_n.jpg

http://i1117.photobucket.com/albums/...C557D14901.jpg


Couldn't be happier with the way it turned out.

I should mention it has a 2" receiver also.

Here is a short little video I made:
Buckstop 2 - YouTube

Corey, we need to be able to edit our posts. Triple posting isn't fun.

For reference here is what she looked prior:

http://sphotos-b.xx.fbcdn.net/hphoto...11297960_n.jpg

http://sphotos-b.xx.fbcdn.net/hphoto...57363290_n.jpg

Thanks for the warning! :yikes2:


Those bumpers look pretty good, but the way they attach to the frame leaves a lot to be desired. Those flanges welded to each end of the frame are really flimsy.

Looks good :thumbs up yellow:

It actually has additional brackets that attach to the crash bar as well.