Oil Lines
Dieselsite recommends replacing the high pressure lines yearly with a chipped truck. Is this really necessary? Or just making my pocket lighter? They are great people to talk to. Has anyone blown one of these lines? I had a 1705 on my truck for about 50,000 and now a Phoenix(not many miles on that yet:(). Would it be beneficial to replace these? Also how about the HPX line? Good or a waste?
|
I would get a set of o-rings to keep in the truck. That is where you usually get your failure. Replacement O-rings for Ford Diesel Engines
|
i had one blow
i had the short one the goes to the drivers side blow 1 month after putting in my pheonix, i was running on stock when it happened. the line burst out the side at the fitting but the oring was actually fine. i had a local hydraulic place make a custom hose a little longer and the guy told me it would handle twice the pressure for less than half the price.
|
I have yet to loose one.
I am currently running a four line output from my Stealths, all of which have well over 150k on them. Only HPO issue I have had so far is a blown out fitting. There have been may reports of the lines blowing though. |
It's like automatic transmissions and powdered metal rods.....
They will or they won't. Could I be any more vague? Probably not. |
All times are GMT -5. The time now is 09:49 AM. |
All Contents Copyright 2008-2020, Power Hungry Performance