Power Hungry Performance Forum

Power Hungry Performance Forum (http://forum.gopowerhungry.com/forum/index.php)
-   2003 to 2007 6.0L Power Stroke Diesel (http://forum.gopowerhungry.com/forum/forumdisplay.php?f=24)
-   -   my story and my questions (http://forum.gopowerhungry.com/forum/showthread.php?t=5287)

Corey Cohron RIP Mon, October 4th, 2010 05:21 PM

Do you mean converting it remotely from an F-150 programmer to a 6.0L programmer? If so, the answer is no... we need to have it in hand to change the firmware.

ssredrino Mon, October 4th, 2010 07:37 PM

gryphon programming
 
no i understand you need my programmer in your hand to convert it to a gryphon.

upon more reading i discovered that after you have sent the programmer back to me.

that you can remotely program my programmer to program my pcm/tcm and ficm

and then reset my programmer back to being just my new gryphon

am i correct?

ssredrino Fri, October 8th, 2010 05:21 AM

aasumption
 
well i will assume i got it right

ssredrino Sat, October 9th, 2010 05:48 AM

thanks cody eh
 
for our phone conversation i did not realize who i was talking to but i just wanted to say now that i do. lol

if you want a copy of the vodu

call me or let my know i will email you a copy

sent my order in last night now i need to send php the programmer i am having a little trouble finding where to send it to lol
also i could not get the serial number from the programmer from the unit while hooked to truck but Pegasuses got it after i had sent in my order.

i will send it in with the unit

ssredrino Wed, October 13th, 2010 04:24 AM

edge sent
 
insured priority

ssredrino Mon, October 25th, 2010 04:46 AM

crown victoria
 
my dad has a 2000 ford crown vic an ex police car can it be remapped?

or what is needed?

ssredrino Fri, October 29th, 2010 05:57 PM

dyno days!!!!!!!!!!!!1
 
is it finally over? :happy-dancing:

Power Hungry Sat, November 6th, 2010 11:53 PM

Crown Vic is a good candidate for returning. Used to do quite a number of them for Law Enforcement. Those 4.6L enignes can take quite a beating!

Yeah, Dyno Day is done and we had quite a blast. :2thumbs:

ssredrino Tue, November 9th, 2010 05:28 AM

will the griffin?
 
thanks Bill,

and from all that own 6.0 psd truly thanks

my order? cody said ships last thursday? also question, in forum prices option 3- factory pcm rollback and your upgraded ficm will my predator still work? really that is what i want out of the box pcm program or better? also will the griffin do an injector test?

lol i am getting itchy

will the griffin program my dads car? the crown vic what edge evo would i need ?

Power Hungry Wed, November 10th, 2010 09:29 AM

As to the rollback question, yes... your Predator should work just fine. You will need to make sure you return the vehicle to stock first, but that's the only concern.

Gryphon does NOT perform an injector test.

Gryphon does NOT natively support a Crown Vic. I'd suggest X-Cal for that.

Hope this helps.


All times are GMT -5. The time now is 12:37 PM.


All Contents Copyright 2008-2020, Power Hungry Performance