Miss and engine light on after running high idle setting
Tuesday I let my truck run on the high idle setting for about 10-15 minutes to keep ac cold, had some meat in car and had to make a stop, anyway, when I came out the truck was missing and the light was on...I cut it off a few minutes later and restarted, the light went off, and the miss gone for the next five miles home. Today, the miss is back and the engine light??? Any suggestions???
|
This is an 02 with a TS 6 position chip
|
Get the code pulled. Possibly a UVCH problem (lose connection).
|
Got the codes pulled yesterday...
P1316, P1211,P0541, P1876, P1832 It showed on a cylinder camparison test that 6 & 8 were acting up, you can barely tell it is missing at idle. On the buzz test, only no. 6 injector barely buzzes compared to the others...now that I have an idea which one I will pull the drivers valve cover and check the harness. |
It was the plug loose under the valve cover :happy-dancing:
|
All times are GMT -5. The time now is 09:54 AM. |
All Contents Copyright 2008-2020, Power Hungry Performance