Power Hungry Performance Forum

Power Hungry Performance Forum (http://forum.gopowerhungry.com/forum/index.php)
-   1994½ to 1997 7.3L Power Stroke Diesel (http://forum.gopowerhungry.com/forum/forumdisplay.php?f=26)
-   -   what are my options tuner wise (http://forum.gopowerhungry.com/forum/showthread.php?t=3502)

bthurz Wed, March 10th, 2010 05:08 PM

what are my options tuner wise
 
i have a 1997 f350 with the 7.3l my question is can i get a gryphon and if so which one i see a cs also and with stock injectors and just exaust and eventually cai what would you guys recomend for tunes

88Racing Wed, March 10th, 2010 05:55 PM

No custom tunes are available for the cs+cts platforms yet.
Alls you'd get is the canned ones the same as edge sells.
The gryphon(edge es) is still available with custom tunes. When Bill gets back from edge haopefully the cs+cts will be able to have custom tunes.
Power Hungry Performance - Available Products

Peace!:)

bthurz Thu, March 11th, 2010 06:24 PM

what does a gryphon look like edge attitude? does it have built in gauges? i thought so but then i wasn't sure if i was confusing it with that other bigger looking one not sure what its called but has lots of buttions unlike the additude style

bthurz Fri, March 19th, 2010 03:31 PM

bump someone gotta have a pick of a gryphon for the 7.3

ChuckD Sat, March 20th, 2010 11:01 AM

It will look like the one for the 150 I am not sure on the mounting options.

soutthpaw Sat, March 20th, 2010 08:24 PM

Well very few of us Coal Rollers use a programmer like the Gryphon cuz a Phoenix flip chip and seperate gauges is sooo much nicer... once you have experienced shift on the fly with a chip, you will not want a programmer.. I believe you get more position options on the chip...

bthurz Mon, March 22nd, 2010 06:49 PM

oh ok so thats like a ts style chip

ChuckD Mon, March 22nd, 2010 07:10 PM

Quote:

Originally Posted by bthurz (Post 28248)
oh ok so thats like a ts style chip

Yuppers.

907DAVE Mon, March 22nd, 2010 11:58 PM

Quote:

Originally Posted by soutthpaw (Post 28137)
Well very few of us Coal Rollers use a programmer like the Gryphon cuz a Phoenix flip chip and seperate gauges is sooo much nicer... once you have experienced shift on the fly with a chip, you will not want a programmer.. I believe you get more position options on the chip...

Exactly........I have had many different programmers and would not trade ALL of them for the 6 position chip.

It is soo cool to be cruising in economy mode and switch it up to race to blow someones doors off, then switch back and keep on cruising.

I personally hated pulling over and waiting forever to load a new program.


All times are GMT -5. The time now is 07:36 AM.


All Contents Copyright 2008-2020, Power Hungry Performance