intake elbow 2006 6.0
 

anyone running an aftermarket intake elbow. if so what brand and what were your results

My buddy has one on his 06. He like its, but its mainly just for looks.

6061.com Custom sheet metal intake elbows and valve covers Aaron Larsen you can see it in the middle of picture #7

I run the Accufab and have been very pleased with the results. Adds a port for my boost gauge.

I got a buddy with the banks setup, looks nice and damn that thing is huge, It rubs the hood insulation a bit.

Couldn't say if there was a increase in power though.

thanks for the reply i was wondering if it was going to be worth the money for fuel savings

Accufab
And edge programer when I first got it took me from 8.5 to 13 mpg
can't say it helped or not 4.10 gears = bad mpg but getting better.
JER-1
:thumbs up yellow:

You will not see any noticeable gains in either power or fuel economy with an aftermarket elbow, especially on an '06 that already has the improved elbow with no EGR throttle body. I put an '05-'07 Banks Technicooler and elbow setup on my '03, replacing the crappy '03 elbow and removing the throttle body. Didn't notice any mileage or power change, even with the better intercooler. Also, two of the elbow bolts stripped out of the intake when I was installing (with a torque wrench) and I had to drill/tap/helicoil them, not a fun experience.