DIY Mods?
I fixing to get a Phoenix chip but I like to know what DIY mods I can do before hand that will help over all with out hurting anything?
I know I have to do a intake mod, I like to do a 4" down pipe all the way back, is there any thing else that I can do or should I do? |
Quote:
|
Thanks CJ45LC yes I still have the stock muffler and it is in good shape is there a good one you can think of to use
|
Quote:
I just hate to see folks cut a perfectly good exhaust off like someone I could mention...me. I don't believe the 4" exhaust gained me much if anything at all on a stock truck with just a chip but I had no idea about other options when I bought the 4" |
Thanks CJ45LC sounds good thanks for the info
|
Other things to check out are the Zoodad and Hutch mod. Both of which have merit, but I dont know if there is any proven gains.
|
Thanks Dave for the info
|
4" exhaust, I don't think you will see any gains. But I do like the sound a lot better. Not as much popping from the exhuast. And if you do more upgrades, you will benefit from it.
6637 filter is pretty cheap and worth doing. Zoodad mod....don't know if I gained anything. I just like tinkering with my truck. Shim the fpr to provide a better fuel supply for all 8 injectors.This can be done with just a screw. But you might want to get the filter bowl gasket kit. The gasket behind the compression nut was desintigrated on mine. Wicked wheel, $75 and prevents surge. Cured mine 100%. |
Thanks Ram I sent you a message also
|
All times are GMT -5. The time now is 11:31 AM. |
All Contents Copyright 2008-2020, Power Hungry Performance