Ok, found the posts!
Quote:
Originally Posted by 88Racing
There's a relearn procedure.
KOEO.
Press down steadily till it bottoms out then back slowly to starting position 3 times.
Then turn off.
Then turn back on and start.
Going from memory here.
JMHO
[OP asks which pedal]
Gas pedal.
I'll look for the relearn proceedure.
[short time later]
Found it! 
Just disconnect the battery for 5 minutes.
This will cause the PCM/ECM to reboot and the Keep Alive Memory to be erased so it can start a relearn proceedure.
You can do this while replacing the switch.
Peace! |
Since it seems like the only thing you need to do is to try disconnecting the battery for 5 mins do clear the memory, then do that. The pedal pushing probably wont do anything but I copied it for refrence that these were the posts.