Thread: Improving the 7.3 transmission cooler
View Single Post
  #1  
Old Wed, February 23rd, 2011, 02:04 PM
rammertide07 rammertide07 is offline
God & Guns
  
Join Date: Dec 2010
Location: Rogersville, AL / Currently in Pollock, LA
Posts: 307
rammertide07 is on a distinguished road
Default Improving the 7.3 transmission cooler
I found a parts list to install a 6.0 cooler on a 7.3- Includes:
8 x 1/2" Heavy Duty Clamps
6' x 1/2" Trans/Oil Cooler Line
2 x 3/8"-1/2" Adapters

On the trans/oil cooler line...is that just automotive hose? Is there anything missing?...other than the 6.0 cooler? I also saw some transmission coolers at an auto parts store a while back that had coolers for small cars up to big box trucks (some had fans on them). Wasnt sure if those would work just as good or would it be best to stick with the 6.0 cooler???

And the BIG question (drum roll): Where exactly is the transmission cooler I thought it was on the front but someone told me it is the power steering cooler. If ya'll have any links to share that is more complete than what I found, please do share.

Thanks!!!
__________________
01 F350 7.3 4x4 CC SRW/3.73/315-75-16/Aeroforce Interceptor/BD Thruster II/ Bellowed Up-Pipes/4" turbo back exhaust/CCV Mod/DIY 6637/FPR Shimmed to 65 PSI/TS chip reburned with PHP tunes (Stock, 40T WITH Whsiper tune, 80DD, 100R, 140Ex, 140SS)/Replaced and Cleaned EBPS & Tube 4-6-12/Zoodad mod/Recon smoked cab lights/MM Hubs/Cowl Hood/HPx
Reply With Quote