Thread: Building an engine run stand.
View Single Post
  #32  
Old Mon, July 11th, 2022, 08:27 PM
cleatus12r's Avatar
cleatus12r cleatus12r is offline
F Your Yankee Blue Jeans
  
Join Date: Jan 2009
Location: Somewhere in Montana
Posts: 2,665
cleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to all
Default
That's the 460 going (is in but not yet running) into my '89 F350 for a winter pickup. I'll be making the wiring harness for the Duraspark distributor to GM HEI module and E-CORE coil tonight.

The 360 thing with 340 pistons for the buggy is in the works....taking the pistons to the machine shop tomorrow so the block can get bored and the wrist pin bushings can be installed/sized.
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years.
Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim.
Reply With Quote