View Single Post
  #10  
Old Wed, October 27th, 2021, 08:01 AM
cleatus12r's Avatar
cleatus12r cleatus12r is offline
F Your Yankee Blue Jeans
 
Join Date: Jan 2009
Location: Somewhere in Montana
Posts: 3,063
cleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to all
Default

The rocker shims came on Friday and the 9.050" pushrods came in yesterday. I had some time to figure out the shim thickness on a few cylinders and came to the conclusion that .010" shims were good to get plunger travel to about .050" .

So......

I'll get the intake put on today and maybe get the run stand pushed over tonight.

Seriously, after 3 months and 4 days since this project started, I am emotionally DONE with this ride. It better run and stay together for a while!

There's also about to be a 7th 7.3L in the stable.
__________________
Tuning, flashing, burning chips, and repairing all aspects of 7.3L Powerstrokes.
SEVEN 7.3L-powered vehicles in the driveway. Two didn't come that way from the factory!
Reply With Quote