Turn the key on and plug the Evo in. The "HEX" code should show up on the display. If it does not (newer firmware doesn't display this) then do the following:
From the main display press [Menu]
Select "Diagnostics" and press [Enter]
Select "Tech Support" and press [Enter]
Press [Enter]
Press [Enter]
Select "Truck Info" and press [Enter]
The code displayed is your calibration or "HEX" code.
Let me know.
__________________
Bill Cohron - The Mad Doctor
Power Hungry Performance - The ORIGINAL in Ford performance tuning... Since 1996!
(678) 890-1110
www.gopowerhungry.com - Home of the Hydra Chip, Minotaur Tuning Software, and the new Orion Reflash System for Navistar!
Bring back Windows™ XP and 7.
Windows™ Vista and Windows™ 8 is a pain in my a$$!
Windows™ 10 is only slightly less annoying!
|