If you're wanting to monitor and program from the same device, then the SCT LiveWire is pretty much your option.
Now, a more expensive option is to go with the SCT X4 as your programmer and then use the Edge Insight CTS3 as your monitor. I much prefer that as a monitoring device, but of course that will nearly double your costs.
A third option would be to have your PCM reflashed with a single modified tune and then go for the Insight CTS3. It's a little more cost effective, but also less flexible as you're limited to the single tune on the PCM. And honestly, you're only saving about $150.00.
Those are pretty much your choices. Let me know if you have any other questions.
__________________
Bill Cohron - The Mad Doctor
Power Hungry Performance - The
ORIGINAL in Ford performance tuning... Since 1996!
(678) 890-1110
www.gopowerhungry.com - Home of the
Hydra Chip,
Minotaur Tuning Software, and the new
Orion Reflash System for Navistar!
Bring back
Windows™ XP and 7.
Windows™ Vista and
Windows™ 8 is a pain in my a$$!
Windows™ 10 is only slightly less annoying!