On second thought, I will assume that you have cleaned the PCM contacts good enough.
This is just me thinking out loud but it goes for ANYBODY doing tuning. If you put two or more different tunes on a chip that are not the same hex (i.e. VDH5 in position 1 and VDH2 in position 2, etc. ) then you will have a stall condition when you change programs.
DO NOT MIX HEX CODES ON A CHIP!
__________________
Tuning, flashing, burning chips, and repairing all aspects of 7.3L Powerstrokes.
SEVEN 7.3L-powered vehicles in the driveway. Two didn't come that way from the factory!
|