In order to change the Rev Limiter, you need to connect to the vehicle and open the Orion software. (Please see attached image for reference)
- From the Orion Dialog, select [Parameters] -> [View/Edit Parameters]
- From the Parameters Dialog, select [Parameters] -> [Read Parameters]
- In [Parameter Blocks], scroll down and select Block [82 - Engine Family and Transmsission]
- In [Parameter Levels], select Parameter [003 - High Idle Engine Speed]
- Enter the desired RPM in the [Modified Parameter Value] box
- Select [Parameters] -> [Write Parameters] to change the value in the ECM
- Close the Parameters Dialog
- Follow Key Cycle procedures as requested by the software
The new Rev Limiter should now be set and you can disconnect.
If you have any questions, please let us know.
__________________
Bill Cohron - The Mad Doctor
Power Hungry Performance - The
ORIGINAL in Ford performance tuning... Since 1996!
(678) 890-1110
www.gopowerhungry.com - Home of the
Hydra Chip,
Minotaur Tuning Software, and the new
Orion Reflash System for Navistar!
Bring back
Windows™ XP and 7.
Windows™ Vista and
Windows™ 8 is a pain in my a$$!
Windows™ 10 is only slightly less annoying!