Thread: So. Talk to me about this new "SOI offset".
View Single Post
  #12  
Old Sun, December 27th, 2009, 10:21 AM
cleatus12r's Avatar
cleatus12r cleatus12r is offline
F Your Yankee Blue Jeans
  
Join Date: Jan 2009
Location: Somewhere in Montana
Posts: 3,063
cleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to all
Default
Quote:
Originally Posted by soutthpaw View Post
Under parameters there is a SOI offset too though....
If it's the one near the top that says "global offset", then that parameter takes whatever calculation for SOI that is made and automatically adds or subtracts that value across the board.

Say with all of the calculated SOI maps you would end up with 26.5 degrees of SOI BTDC at a certain operating condition. If you put a "-5" in the global offset parameter, then the PCM will tell the IDM to fire an injector at 21.5 degrees. Same if you put in a "2"; you'd end up with 28.5 degrees.
__________________
Tuning, flashing, burning chips, and repairing all aspects of 7.3L Powerstrokes.
SEVEN 7.3L-powered vehicles in the driveway. Two didn't come that way from the factory!
Reply With Quote