View Single Post
  #1  
Old Thu, April 12th, 2012, 03:33 PM
svorob svorob is offline
Whopper Junior
 
Join Date: Feb 2012
Posts: 2
svorob is on a distinguished road
Default FICM tuning after re-solder and rollback

I am looking into having the FICM done at FICMrepair.com and putting on the atlas 40 tune.
I currently have the VXCF9C4 ecm strategy and the TQCK0CX tcm
Are these good strategies or should a rollback be done??or is the atlas 40 good enough??
I am going to do an egr delete this summer can the CEL be solved with the above tuning?
I hardly tow....maybe a handfull of times ~4500 lbs is the atlas 80 too much?
I am also planning studs this summer.

I am using an edge CTS programmer to montior the engine and dont run any "levels" on it. Is this something I can send in to have some tunes put into it? or should I sell and go with a different tuner (using PHP tunes)

Thanks for the time and help
Reply With Quote