Thread: MAP sensors and such
View Single Post
  #3  
Old Sat, September 10th, 2011, 03:55 PM
cleatus12r's Avatar
cleatus12r cleatus12r is offline
F Your Yankee Blue Jeans
  
Join Date: Jan 2009
Location: Somewhere in Montana
Posts: 3,063
cleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to all
Default
The PCM with factory tuning only cares about the first 12.76 PSI anyway. That's why it doesn't care if you're at 18 PSI, 24 PSI, or 8000 PSI. It will fuel the same after 13 PSI. The only reason the truck does not fuel more than what you're already getting above 13 PSI is that the stock injectors are giving all the fuel they can.

One more thing, why does everything that's not stock have to be an "upgrade"? It's only an upgrade if it works better than stock and FEW things work better than stock. "Upgraded" compressor wheels that are actually a "downgrade" in most instances and "upgraded" intakes that DO NOT give your engine more than an stock intake and usually feed your engine WARMER air are more like "downgrades". Seriously.
__________________
Tuning, flashing, burning chips, and repairing all aspects of 7.3L Powerstrokes.
SEVEN 7.3L-powered vehicles in the driveway. Two didn't come that way from the factory!
Reply With Quote