[usnavyad]

hey all ive been a loyal fan and tuned many trucks with php then i got a new truck and finally caught cody and wait till you read this conversation also posted on powerstroke.org and psn


Welcome! You have entered [The PHP Lounge] at 7:20 am
7:20 am: Welcome to the PHP Chatroom! Please post your question and someone will respond as quickly as possible. Thank you.
[usnavyad] 7:20 am: cody ur on here
[usnavyad] 7:21 am: u guys are extreamly hard to get a hold of
[Cody B.] 7:22 am: That's the general consensus.
[Cody B.] 7:22 am: But then again, I only work for PHP 5 hours a week.
[usnavyad] 7:24 am: yeah thats what bill told me when i met him ur out of cali right
[Cody B.] 7:24 am: May as well be CA....Montana actually.
[usnavyad] 7:24 am: maybe u can give me a hand with some questions i need to talk to bill but its hard to reach him
[usnavyad] 7:26 am: ?
[Cody B.] 7:27 am: I doubt I'll be much help (limited resources) but I'll try.
[Cody B.] 7:27 am: You'll have to be patient....I'm on the phone all the time and can't type and talk really well.
[usnavyad] 7:28 am: ok heres what happened last year i drove to bills house he was leaving for a event in fl but he tuned a ts 6 pos for me ..... now im buying a 6.0l right now and im thinking bout the cts with php tunes
[Cody B.] 7:29 am: Stock 6.0L?
[usnavyad] 7:30 am: no arps black onyx head gaskets ab intake mbrb exhuast
[usnavyad] 7:30 am: im leaving the injectors and turbo alone for right now
[Cody B.] 7:30 am: So a stock truck..... No need to buy any custom tuning yet.
[usnavyad] 7:31 am: yeah not the canned cts tunes
[usnavyad] 7:31 am: ur talking bout like dyno tuning
[Cody B.] 7:32 am: No, there's zero need for anything Bill would do. The calibrations that come on the CS/CTS platform would work fine for your truck at the current time. You'd basically be spending a lot more money on calibrations that won't perform any better than what comes on the device.
[usnavyad] 7:33 am: so ur telling me that stock canned cts tunes are no different then bills tunes at all
[usnavyad] 7:33 am: ur telline me the egts are the same and all paramters are the same
[Cody B.] 7:33 am: No, I'm saying that you won't notice much difference between the two. There's only so much that a stock 6.0L will do.
[usnavyad] 7:34 am: i agree i know for a fact that canned tunes do not have the same pids as customs
[Cody B.] 7:34 am: PIDS have nothing to do with tuning.
[usnavyad] 7:35 am: the readings im saying
[Cody B.] 7:35 am: Bill has no control over what is displayed on the datastream. That's all Edge.
[usnavyad] 7:35 am: i understand that but has alot to do with injection timing
[usnavyad] 7:36 am: which can change the egts and other paramters
[Cody B.] 7:36 am: Edge modifies the EXACT SAME tuning maps that Bill does.
[Cody B.] 7:37 am: They always have.
[Cody B.] 7:37 am: Now, the extent of the changes is different obviously.
[usnavyad] 7:37 am: so bill and edge have the same exact tunes so no need to buy bills tunes
[Cody B.] 7:37 am: You're getting ahead of me.
[usnavyad] 7:37 am: from what ur telling me
[Cody B.] 7:37 am: READ...Now, the extent of the changes is different obviously.
[usnavyad] 7:38 am: i agree
[usnavyad] 7:39 am: so whats the difference between a gryphoon cts and an edge cts
[Cody B.] 7:39 am: But it's not enough to notice a difference on an 8000 lb. truck. If Edge has a calibration marketed as a 60 horsepower calibration, it's going to make 60 additional horsepower. If Bill has a 60 horsepower calibration, it's going to make 60 additional horsepower.
[usnavyad] 7:40 am: i agree
[usnavyad] 7:40 am: so if i buy ur gryphon cts and and edge cts there the same thing?
[Cody B.] 7:41 am: Nothing different. Once you order and receive calibrations from Bill, the splash screen (start-up screen) is different and the calibrations are different. If you order the device from PHP, you'll pay $30 per PHP calibration. If you order an Edge CS from another vendor, you'll pay $60 per PHP calibration. The device, should you buy it from us, will ship from Edge anyway.
[usnavyad] 7:43 am: how are the cals different from edge bill has tuned everyone of my trucks and now im hearing from u theres no point i dont understand this
[usnavyad] 7:47 am: ?
[Cody B.] 7:48 am: Why waste money on something that's not going to give you a real definite improvement? It's like installing aftermarket intake setups or a larger exhaust. It really doesn't do anything but at least you can say you have it. You already know how hard it is to get in touch with Bill. Heck, just visit the forum and find all of the "where are my tunes?" threads. I'm trying to save you money and frustration because in the grand scheme of things, until you actually modify something on the truck that requires "custom" tuning, you'll be hard pressed to really feel a huge difference between Bill's standard 6.0L calibrations and Edge's CS/CTS programming that already comes on the device. While the tuning is different, it HAS to be fairly similar to attain the desired results....there are only so many ways to skin a cat so-to-speak. It's no different with the 7.3L trucks. There is no magic between different tuning companies when dealing with a stock truck....comparing the tuning between different vendors, it will surprise you just how similar they all are.
[usnavyad] 7:53 am: i know with the 7.3l when i went and spoke with bill he explained how they are very different and as well as the history behind dp tuners and all of that how come on canned bullydog tunes and bill tunes is there there such a difference in fuel quanitys and timing of the injerctors fireing and also y are u seeing different factors ont he egts and boost on canned vs bills tunes on the same truck i can put a bully tune and a php tune on the same truck and my solus will give me 2 different read out of timing and the paramter reads outs as well as fuel economy
[Cody B.] 7:54 am: Do what makes you happy. I don't think there's a scan tool out there that will show "timing" on a 7.3L though.
[usnavyad] 7:55 am: so steer away from php got ya ill be sure to post this up on the fourms on how php really works i was a loyal php fan up unitl this thanks for all of ur help cody
[Cody B.] 7:56 am: I'm not trying to scare you.