Thread: PMR to Forged Swap
View Single Post
  #2  
Old Thu, December 17th, 2009, 10:33 PM
cleatus12r's Avatar
cleatus12r cleatus12r is offline
F Your Yankee Blue Jeans
  
Join Date: Jan 2009
Location: Somewhere in Montana
Posts: 3,063
cleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to all
Default
It helps to have money.

Plan on a total rebuild if you decide to do this job simply because it requires a total teardown anyway. You don't necessarily need new pistons, and if your cylinder walls are in good shape, a mild hone job with a "turdball" hone will help with new rings.

Be sure to check all pistons for cracks. The cracks will be in the piston bowl area extending into the crown if there are any.
__________________
Tuning, flashing, burning chips, and repairing all aspects of 7.3L Powerstrokes.
SEVEN 7.3L-powered vehicles in the driveway. Two didn't come that way from the factory!
Reply With Quote