Thread: Don't ever agree to do this.....VENTING
View Single Post
  #8  
Old Thu, October 8th, 2009, 09:29 PM
cleatus12r's Avatar
cleatus12r cleatus12r is offline
F Your Yankee Blue Jeans
  
Join Date: Jan 2009
Location: Somewhere in Montana
Posts: 3,063
cleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to all
Default
Well, I'm a little happier now..injecting the sealant into the pan/block seam seems to be holding. No leaks after 3 miles and before it took about half a mile to leak about what I figure to be about a cup.

There might be some engine noise but I have yet to really try to hear it because I don't want to hear it. If it takes a dump, I'll call the engine reman. place and make them do it.....it might have a total running time of 30 minutes.

Time will tell. I might run it into town tomorrow night for the guy.

$5474 total parts and labor into an $1100 truck.
__________________
Tuning, flashing, burning chips, and repairing all aspects of 7.3L Powerstrokes.
SEVEN 7.3L-powered vehicles in the driveway. Two didn't come that way from the factory!
Reply With Quote