Thread: Building an engine run stand.
View Single Post
  #21  
Old Mon, May 30th, 2022, 10:35 PM
cleatus12r's Avatar
cleatus12r cleatus12r is offline
F Your Yankee Blue Jeans
  
Join Date: Jan 2009
Location: Somewhere in Montana
Posts: 3,063
cleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to all
Default
Quote:
Originally Posted by Power Hungry View Post
Oooo That's gonna be a fun one!
Thinking I might get it torn down this week. I've got a bit of off-time scheduled so I'd like to get a look inside.

I picked up an 89 F350 crewcab a few months ago with a "ran-when-parked" 460 that had an incorrectly installed front main and pan seal. Unknown miles but I didn't like all of the sludge and crud in the lower part of the engine when I had the pan off (as in it's a poster-child for the world of poor maintenance practices). Besides, the longer I stare at the EFI 460, the more I think that I don't want a boring 460 that can't handle a different cam or any major performance pieces due to the speed density system...and the best time to do the work is right now with the engine already out.

I'd miss the ease of starting, but low 200s horsepower will suck!
__________________
Tuning, flashing, burning chips, and repairing all aspects of 7.3L Powerstrokes.
SEVEN 7.3L-powered vehicles in the driveway. Two didn't come that way from the factory!
Reply With Quote