![]() |
|
1999 to 2003 7.3L Power Stroke Diesel 7.3L Power Stroke Diesel equipped Super Duty and Excursion |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
![]()
Here are a few pic's of a stereo build I have recently completed. This is my first stereo build using this quality gear and the first time playing with fiberglass.
The build features:
First thing was to make some mounts for the tweeters in the sail panels. Little bit of fiberglass.... ![]() After some filler and paint..... ![]() Then to mount the mids.... ![]() ![]() |
#2
|
||||
|
||||
![]()
Next up is the amp rack.
All laid out.... ![]() Amps and crossovers mounted..... ![]() Ready for glass..... ![]() Cloth (actually it is a Moose sized game bag) stretched out and ready for resin...... ![]() |
#3
|
||||
|
||||
![]()
Shell ready to trim out......
![]() Next up was to mount and wire the amp rack...... ![]() Shell trimmed out and test fit.... ![]() After a bit more trimming and some carpet, the back wall is done... ![]() |
#4
|
||||
|
||||
![]()
Next big project is mounting the sub. I decided to put it in the center consul seat bottom.
Should fit in there......... ![]() Seat stripped, and "pan" cut out........ ![]() New bottom test fit..... ![]() ![]() ![]() ![]() |
#5
|
||||
|
||||
![]()
Box test fit.........
![]() ![]() Now to finish the box.... ![]() ![]() ![]() ![]() Box bottom carpeted......... ![]() |
#6
|
||||
|
||||
![]()
Now to make it all fit inside the cushion.
Here is the seat foam gutted out..... ![]() Foam and cover on........ ![]() Seat brackets modified, and box stuffed........ ![]() Driver installed..... ![]() Consul complete....... ![]() Looks like there is plenty of room for travel....... ![]() |
![]() |
|
|