|
2004 to 2008 F-150 and Mark-LT 4.2L, 4.6L and 5.4L equipped F-150s and Mark-LTs |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
EOT reading 0
I just installed a gryphon on my 2008 FX4. The engine oil temp reads 0. All of the other PID's seem to be reading fine. Do I have a bad sensor? Really not sure why all of the other's would work, and the EOT doesn't?
Also, I unplugged it AFTER I down loaded the tow tune in order to reinstall the lower dash panel I had removed. When I plugged it back it, it re-initialized the set up and made me download the tow tune again. Is this normal if you unplug, and re-plug it in to the OBD? |
|
|