|
Gryphon Programmer Edge Product has discontinued the Edge Evolution 2, but we still provide support and tuning for it. If you have a question or comment relating the Gryphon (or Evolution) programmer, post it here. |
|
Thread Tools | Display Modes |
#21
|
||||
|
||||
Quote:
The other possibility of course is that the USB input port circuit into your Gryphon has become damaged. I feel this is covered under the warranty if it DID happen, but try the Pegasus uninstall/reinstall first. If that doesn't hack it, talk to Bill or Corey - they'll have to sort it out. - Jack |
#22
|
||||
|
||||
Any luck with the re-installation?
__________________
~ Corey Resting in Peace - 1969 - 2019 |
#23
|
||||
|
||||
buzzfx4, I just stumbled across a thread containing a problem similar to yours. In his case, he didn't quite have the USB cable inserted fully, either in the PC or the Gryphon. It would power the unit, but the Gryphon would not connect. Make sure you're fully plugged in.
And, another thought. Is your PC a laptop? I have a laptop (an Averatec) that WILL NOT power an external disk drive properly. It spins the drive, but if I try to do a backup to the drive, it cannot read the drive properly during the "verify phase". This is even using a USB cable that has two PC end plugs that are supposed to get more power to the external device. There's nothing wrong with the drive of course, it works just fine with a different laptop or my desktop. Possibly, your PC's power supply through its USB port is just not enough to BOTH power AND communicate with the Gryphon? Any way you could try it on a different PC? - Jack |
#24
|
|||
|
|||
Ok. So I gave up. After uninstalling and reinstalling Pegasus and trying to manualy install the programer as new hardware with no luck I just said F it and went looking for another computer. I found an old laptop and installed Pegasus on it and everything that goes with it. The programer works like normal with the new computer, no problem what so ever.
So I have no idea what was wrong with first computer. I thought maybe it was the computers 2.0 USB driver got F up but it wasn't. So I don't know. Thank you every for the help ad the suggestions to fix the problem. |
#25
|
||||
|
||||
Don't worry about it!
I had to find another computer too! VISTASUCKS Lars
__________________
SENIOR MODERATOR--PTLA God doesn't have a Facebook but he's my friend. God doesn't have a twitter, but I follow him. |
Thread Tools | |
Display Modes | |
|
|