Power Hungry Performance Forum  

Go Back   Power Hungry Performance Forum > Power Hungry Performance Product Information > Gryphon Programmer (Disabled)

Gryphon Programmer (Disabled)
Edge Product has discontinued the Edge Evolution 2, but we still provide support and tuning for it.

If you have a question or comment relating the Gryphon (or Evolution) programmer, post it here.


 
 
Thread Tools Display Modes
  #1  
Old Thu, December 15th, 2011, 05:49 PM
jconna jconna is offline
Whopper
 
Join Date: Jan 2010
Location: Harrisburg PA
Posts: 10
jconna is on a distinguished road
Default May have messed up

I took my truck in for a rocker arm issue and didn't think to set the programmer back to stock. How can I tell if the garage flashed and messed up my programming? When I picked it up the tech told me he saw an O2 error code and tried to clear it. Since that time it seems to have a bit of a miss and the shifting seems off. Thanks
  #2  
Old Thu, December 15th, 2011, 06:07 PM
Jackpine's Avatar
Jackpine Jackpine is offline
PHP Groupie
 
Join Date: Nov 2008
Location: Among Elk, Deer and Javalinas on the Mogollon Rim in Aridzona
Posts: 3,243
Jackpine is a name known to allJackpine is a name known to allJackpine is a name known to allJackpine is a name known to allJackpine is a name known to allJackpine is a name known to all
Default

The simplest way to tell is to plug in the Gryphon. If it boots normally and shows your hex code, you're probably fine in the "flash" department. However, if it does not seem to recognize your truck, then the truck was almost certainly flashed. If this is the case, Bill can return it to stock for a fee ($75 I think). And, your tunes will have to be completely rewritten, at the normal cost for tunes.

But, if it's been flashed and doesn't run right, you need to return it to the "garage" and tell them to fix it. It sounds like something is still screwed up and a "tune" will not correct whatever they've messed up.

- Jack
__________________

2024 F150 Platinum SCrew 3.5L PowerBoost FX4, Peragon Tonneau Cover, LineX Bed, 35% Window Tint on All Sides and Rear, Full Nose Paint Protection Film, Husky Mud Guards, Lasfit Floor Liners, VIOFO Dash Cam
  #3  
Old Thu, December 15th, 2011, 06:40 PM
jconna jconna is offline
Whopper
 
Join Date: Jan 2010
Location: Harrisburg PA
Posts: 10
jconna is on a distinguished road
Default

That's good news. Not that I may need to take the truck back in; but that my flash appears good. I'm seeing the same HEX as in my profile and I'm able to switch back and forth between levels. Just hasn't seemed to run correctly since I had it in. I'll get it back to them but thanks for the quick response.
  #4  
Old Fri, December 16th, 2011, 12:37 AM
Jackpine's Avatar
Jackpine Jackpine is offline
PHP Groupie
 
Join Date: Nov 2008
Location: Among Elk, Deer and Javalinas on the Mogollon Rim in Aridzona
Posts: 3,243
Jackpine is a name known to allJackpine is a name known to allJackpine is a name known to allJackpine is a name known to allJackpine is a name known to allJackpine is a name known to all
Default

Great! It really sounds like they need to redo something, but - first try switching back to stock and see how it runs then. If the problem is still there, it pretty much confirms that they need to do more, and, you certainly want it at stock anyway if you take it back.

- Jack
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:50 PM.


All Contents Copyright 2008-2024, Power Hungry Performance