![]() |
|
Gryphon Programmer (Disabled) Edge Product has discontinued the Edge Evolution 2, but we still provide support and tuning for it. If you have a question or comment relating the Gryphon (or Evolution) programmer, post it here. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
I had my truck in the shop getting some tranny work done. I had reverted my programmer to stock before i dropped it off. A while after I got the truck back I tried to program it... and it didnt work. Said something about the HEX code not compatible.... so now what?
![]() |
#2
|
|||
|
|||
![]()
checked my HEX code and it didnt change, so Im not sure why i got an error code...
|
#3
|
||||
|
||||
![]()
So, you are able to retrieve your hex code using the Gryphon? That sounds like the unit has initialized correctly. Possibly, your battery is weak. Could you put it on a charger for a while until it shows fully charged? If so, once the battery looks good, try reprogramming.
If this doesn't work, you MAY have a corrupted file in the Gryphon. If it's the monochrome Gryphon, try reloading the firmware/software using [Updates]->[Gryphon Update Manager] then reload any custom tunes you have with [Updates]->[Custom File Download (Internet)]. If it's the CS/CTS model, you can update firmware/software by plugging it in to Fusion on your PC, but that will wipe out any custom tunes you have and Bill will have to set up a download package on the Fusion server for you to get them back. - Jack
__________________
2024 F150 Platinum SCrew 3.5L PowerBoost FX4, Peragon Tonneau Cover, LineX Bed, 35% Window Tint on All Sides and Rear, Full Nose Paint Protection Film, Husky Mud Guards, Lasfit Floor Liners, VIOFO Dash Cam |
#4
|
|||
|
|||
![]()
Tried to program after driving for a while... everything went ok. Maybe it was the battery that was low??
thanks! |
|
|