|
Gryphon Programmer Edge Product has discontinued the Edge Evolution 2, but we still provide support and tuning for it. If you have a question or comment relating the Gryphon (or Evolution) programmer, post it here. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Got my Gryphon back...same problem :((
I just got my Gryphon back from warranty work about my screen fading and it worked fine for like a day and now i can't hardly read the numbers....I was told over the phone the whole unit was going to be replaced but when I got it back and the serial number was the same so I figured that they found a way to fix it......I sent it in before my one year warranty and now its passed...so I need to send it back again because I really need my programmer...am I going to have to pay for repiars now???
Thanks.
__________________
|
#2
|
||||
|
||||
I wouldn't think you would have to pay for a repair that didn't work, but you'll have to get the REAL answer from Edge.
- Jack
__________________
2014 F150 Platinum SCrew 3.5L EcoBoost 4x4 with SCT programmer |
#3
|
||||
|
||||
I left Bill a note, there could have been a mix up and the wrong programmer was sent back to you.
__________________
|
#4
|
||||
|
||||
Your original programmer is sitting on Bill's desk. You have an entirely new unit -- including the case. Your serial number is based upon your invoice number, so it doesn't change.
You may want to try adjusting your programmer's settings. Information about how to do this can be found in your User's Manual.
__________________
~ Corey Resting in Peace - 1969 - 2019 |
#5
|
|||
|
|||
OK cool, just wondering why it would be doing the same thing...
__________________
|
#6
|
|||
|
|||
I've noticed a few others having the same problem. Here more recently i have come across the same issue. When i go through settings to change the contrast i just bump it up one and all of the sudden the screen is fine. Strange. I just wonder if sunlight has anything to do with it.
|
#7
|
||||
|
||||
This happens every year around this time when temps start to rise. Let the units cool down rather than adjust settings.
__________________
|
#8
|
|||
|
|||
Ok thanks Longshot! I have another question now...my tune might be messed up...I have INSTANT ECON on and I was pulling a 5,000lb trailer the other day and when I would give it gas its would read like 52MPG and when I would let off and it would read 4MPG....just wondering! THanks!
__________________
|
#9
|
|||
|
|||
bump!
__________________
|
#10
|
||||
|
||||
Don't ever watch Instant Economy. Put it on LOAD (Engine load). Do some driving and report back.
__________________
|
|
|