![]() |
|
1997 to 2003 F-150 4.2L, 4.6L, and 5.4L equipped F-150s. |
![]() |
|
Thread Tools | Display Modes |
#11
|
||||
|
||||
![]()
Well all of the forums recommend against jumping the truck with the gryphon connected. Might also be in the manual. I dont usually have anything electrical plugged in when I have to get a jump.
__________________
|
#12
|
|||
|
|||
![]()
Well I just looked through the manual and checked the cigarette lighters still work soooo idk.
And I've never had an issue with jumping and anything breaking.
__________________
6" Rcd suspension lift with 4.56 in the rear Rhino-lined Rockers and bumpers and N-Fab Prerunner light bar with Hella 500 Lights 315/75/16 BFG KO's on 16x10 Eagle Alloys audio and LEDs Questions? Just ask thejake1989@gmail.com |
#13
|
||||
|
||||
![]()
If the cigarette lighter and the programmer work then it is the cable. That is why PHP doesn't tune the '97-'03s. The cable is a weak point.
Ya never say never, especially with modern electronics. Be glad it didn't happen during a programming session.
__________________
|
#14
|
|||
|
|||
![]()
Gonna hook it up to the scanner at work tomorrow and double check that the plug still works
__________________
6" Rcd suspension lift with 4.56 in the rear Rhino-lined Rockers and bumpers and N-Fab Prerunner light bar with Hella 500 Lights 315/75/16 BFG KO's on 16x10 Eagle Alloys audio and LEDs Questions? Just ask thejake1989@gmail.com |
#15
|
||||
|
||||
![]()
That's a good idea. Personally I would go to autozone and say you need a code pulled. That way it wont matter much if the scanner gets fried for some strange reason.
__________________
|
#16
|
|||
|
|||
![]()
idk if its just the comp im on but the livechat didnt show anything after logging in?
__________________
6" Rcd suspension lift with 4.56 in the rear Rhino-lined Rockers and bumpers and N-Fab Prerunner light bar with Hella 500 Lights 315/75/16 BFG KO's on 16x10 Eagle Alloys audio and LEDs Questions? Just ask thejake1989@gmail.com |
![]() |
|
|