|
Gryphon Programmer Edge Product has discontinued the Edge Evolution 2, but we still provide support and tuning for it. If you have a question or comment relating the Gryphon (or Evolution) programmer, post it here. |
|
Thread Tools | Display Modes |
#11
|
||||
|
||||
no run time at all...i got to work and shut off the truck and installed stock tune right away..checked for codes and then left it for the day...next morning installed 87 perf again. my codes came up as yours but bank 2 also. went really gutless...thought the fuel filter was gumming up kinda feeling. and would not rev over 3000 rpm.
__________________
2008 f150 supercrew, 5.4, 3.73 LSD, tonneau cover, 275-65-18 BFG's. Gryphon programmer. XLT with XTR package. Tinted heads and tails with 8000 HID's. 4300 in the fogs. Gott's Mod. Painted grill. |
#12
|
||||
|
||||
No problems until today?
__________________
~ Corey Resting in Peace - 1969 - 2019 |
#13
|
||||
|
||||
Quote:
Regardless, though, I don't like what you're both describing, and I don't have a fix. I doubt it's really a problem with the trucks, or the tunes, but some sort of unforeseen interaction/side effect of mixing the two. It happens in computer programming all the time and CAN be fixed, once the cause is found. It's usually something so simple it's hard to see. I think Bill needs the exact code number to make sense of this. Can you provide it? (One more thing for everyone: In engineering, if you don't have failures, you're not advancing and pushing the envelope. No one wants engineering to operate that way). - Jack
__________________
2014 F150 Platinum SCrew 3.5L EcoBoost 4x4 with SCT programmer Last edited by Jackpine; Wed, February 11th, 2009 at 10:07 PM. Reason: Added thought about the role of failure in engineering |
#14
|
|||
|
|||
Well I reprogramed it with the stock tune, ran it around the block and then programed my 87 performance back in.
Same issue, same code. Is it possible this is a tune related issue meaning a coding issue not that the tune ruined my truck or more then likely a component issue. I think for the time being the best course of action for me is to program it back to stock and run it a bit and see if the same problem happenes. From there my logic would be: no problem, tune related..Problem mechanical related.... Agree? disagree? At 32xxx miles I don't want to wait around to long to see if I need to get it to the dealership before the warranty expires
__________________
Aaron For he is the minister of God to thee for good. But if thou do that which is evil, be afraid; for he beareth not the sword in vain: for he is the minister of God, a revenger to execute wrath upon him that doeth evil. Romans 13:4 |
#15
|
||||
|
||||
What I really think is that Bill needs about five alter egos so he can jump in and help you figure out the problem.
I can't believe you'd have oil pressure problems on a new truck. And, if that were the case, the problem would not go away when you returned it to stock. Are you trying to adjust "Custom Options" when you set in a program? If none of this applies, and if there are no problems running at Level 0, I have to believe the tune is causing the problem. If you agree, I think you should call Bill ASAP. - Jack |
#16
|
|||
|
|||
The only "customizing" I have done with the tuner was to raise the speed limiter to 105 and adjust my tire size. I am going to program to stock in the morning and go from there. I'll keep ya posted.
__________________
Aaron For he is the minister of God to thee for good. But if thou do that which is evil, be afraid; for he beareth not the sword in vain: for he is the minister of God, a revenger to execute wrath upon him that doeth evil. Romans 13:4 |
#17
|
||||
|
||||
What is curious is that we've been doing minor camshaft timing adjustments since 2004 and we've never run into this problem before. Even more curious is that on trucks with CAIs, we don't do any camshaft timing adjustments because it seems to induce a little bit of droning.
I'll get a look back in the files and make sure we have no camshaft modifications. This should at least eliminate the possibility of that being the problem. Question: Is there any specific point it sets the codes? During startup... Driving 40 MPH... Under hard acceleration? Anything you can provide will be helpful. Take care.
__________________
Bill Cohron - The Mad Doctor Power Hungry Performance - The ORIGINAL in Ford performance tuning... Since 1996! (678) 890-1110 www.gopowerhungry.com - Home of the Hydra Chip, Minotaur Tuning Software, and the new Orion Reflash System for Navistar! Bring back Windows™ XP and 7. Windows™ Vista and Windows™ 8 is a pain in my a$$! Windows™ 10 is only slightly less annoying! |
#18
|
|||
|
|||
It does not hit when driving at speed. It hits after I have a driven a distance, short or small and then slow to pull into my garage or drive through a parking lot. It starts to run really rough like it is going to stall but does not quite stall.
I have also noticed it is a hard start now. Previously I would turn the key and fire right up after one crank and now it seems to take several cranks. It has never "not" started but I have been worried a time or two. I thought it is possible the battery was in need of replacing as it is 18 months old or so and with the extreme heat we have out here maybe it had gone dead but I am not so sure now. I was up in the mountains today and my truck got snow covered and sat in 24* weather for 6 hours and fired right up on the first try, so I think maybe the battery is ok. My brother in law is a mechanic and said he thought he had heard of a TSB regarding this very issue so I am going to explore that avenue also. I'll keep ya posted and try to answer any questions to the best of my ability.
__________________
Aaron For he is the minister of God to thee for good. But if thou do that which is evil, be afraid; for he beareth not the sword in vain: for he is the minister of God, a revenger to execute wrath upon him that doeth evil. Romans 13:4 |
#19
|
|||
|
|||
SO quick question. I had gotten a p1000 code and was told somewhere else that is going to be a warranty breaker when I take it in to the shop?
Any ideas if that would be true or if there is a way to get rid of it? Truck goes in the sho today and has been returned to stock for several days
__________________
Aaron For he is the minister of God to thee for good. But if thou do that which is evil, be afraid; for he beareth not the sword in vain: for he is the minister of God, a revenger to execute wrath upon him that doeth evil. Romans 13:4 |
#20
|
||||
|
||||
p1000 means your PCM is witing to complete a drive-cycle. If they see that code at the dealership it tells them one of 2 things:
1. you just disconnected your battery, no big deal 2. you have re-flashed your PCM, big deal I'll try to find the drive cycle procedure from my Mustang Forum and post it up. |
|
|