#1
|
|||
|
|||
tune question
This might be a dumb question but here it goes. Im going to replace my spark plugs. I have the 87 performance tune right now. if i put the E3 sparkplugs in is it going to mess up my tune??
__________________
Gryphon-87 Performance Magnaflow SI/SO K&N FIPK GEN2 Intake Westin Bull bar Lightning Taillights Eagle Deck Lid 15% Tint 285/70 Firestone Destination AT's |
#2
|
||||
|
||||
Nope. You should be just fine. Fortunately, you don't have the 3 valve heads so this should be a good, cheap plug change.
__________________
Bill Cohron - The Mad Doctor Power Hungry Performance - The ORIGINAL in Ford performance tuning... Since 1996! (678) 890-1110 www.gopowerhungry.com - Home of the Hydra Chip, Minotaur Tuning Software, and the new Orion Reflash System for Navistar! Bring back Windows™ XP and 7. Windows™ Vista and Windows™ 8 is a pain in my a$$! Windows™ 10 is only slightly less annoying! |
#3
|
||||
|
||||
Just make sure to follow the tsb on the torque spec on the plugs.
You can locate it over at f150online or Bill or Jack may have knowledge of the value. Lars Ok I found it. Use a vacuum first to clean debris around area of work. Dab of nickle antiseeze on the threads. Turn them in HAND TIGHT. Until they seat. The take them an additional 1/8 turn with the rachette.
__________________
SENIOR MODERATOR--PTLA God doesn't have a Facebook but he's my friend. God doesn't have a twitter, but I follow him. Last edited by 88Racing; Tue, May 26th, 2009 at 11:40 PM. |
|
|